Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 5:50 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 24 posts ] 
Author Message
PostPosted: Wed Feb 06, 2008 3:33 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
First off, I'm not a sponsor and I don't intend to offer items like this for sale here or anywhere else. Just wanting to get rid of the extras I have in the shop.

Second off, I PM'd Lance and Brock last week to check and see if it would be ok for me to sell these left over blocks and I got the A.O.K :geek:

So, what I have are 7 blocks left over from making myself some new fretboard radius sanding blocks. The blocks are 3" wide x 1-3/8" thick x 16" long. The are made from 3 pieces of 1" eastern hard maple, laminated together with opposing grain direction to help counter warping. These blocks are dead level (in my 45%RH shop) and could easily have sandpaper on the flat side to make a nice flat sanding block as well or on one of the edges.

Actually, 1 of the blocks is under 1-3/8" (my test block) I think about 1-5/16" and is cut to 16" radius the remaining blocks are not radiused yet.

So, here's what I'm offering. The first 6 people who want a block get to pick from 5 different radius' to have the block cut to (12", 14", 16", 18" or 20") , the 7th will get the 16"R test block (or just say you want the test block)

$40 per block plus shipping. The 16" test block I'll sell for $35 as it's under 1-3/8" thick (marginally really but still smaller).

Here's a picture again of the jig used to make the blocks

Attachment:
shop stuff 023.jpg


And here are the two blocks I made for myself, I'm going to cut grooves in one to clear the frets for a clamping caul. You can see the differing grain orientation on the ends.

Attachment:
shop stuff 024.jpg


Post here if you want one and what radius you want it cut too but pm me your shipping information. Payment will be paypal.


You do not have the required permissions to view the files attached to this post.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 4:17 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 3:50 pm
Posts: 4662
Location: Napa, CA
Rod...put me down for one 16" radius block. Hey I could have spent a lot more for an Aluminim one at StewMac...now I can blow the balance on wood.

Thanks much for the offer. I'll PM you my address.

_________________
JJ
Napa, CA
http://www.DonohueGuitars.com


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 4:23 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
You got it JJ, actually when you emailed me with great interest a couple days ago, I took your block out of the total here, so I still have a total of 7 blocks left :D .

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 4:42 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12973
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Very nice Rod and an essential building tool too.

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 4:47 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Tue Dec 20, 2005 7:46 am
Posts: 2227
Location: Canada
Wow, your timming is impecable... Where were you last week when I bought one of these from Stew-Mac??? :lol:

_________________
I'd like to be able to prove, just for once, that money wouldn't make me happy...


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 5:01 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jun 13, 2005 6:53 am
Posts: 2094
Location: Toronto, Ontario, Canada
Rod,

Just to confirm my prior order for a 12" and a 16". What a great deal...thanks bud!

Rod in lieu of payment PM me with what we can do in trade for a back/side set from my stash and we can figure out how to settle up. How's that sound?


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 5:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Anthony, yes you have a 12" and 16" already coming your way.

PM sent.

Thanks.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 7:22 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Oct 10, 2007 10:23 am
Posts: 230
Location: United States
Rod,

I would like a 16" radius block if you still have one available.

Thanks,

GregH


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 7:25 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
You got it Greg.

Got your pm :)

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 8:19 pm 
Offline
Koa
Koa
User avatar

Joined: Mon Jan 03, 2005 2:40 am
Posts: 993
Location: United States
Hi Rod,

I'll take a 16" radius block if you still have any left. I've been needing one of these for awhile.

Thanks!

John


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 9:00 pm 
Offline
Koa
Koa

Joined: Tue Jul 04, 2006 3:24 am
Posts: 744
Location: United States
Great setup Rod!

_________________
Brad
Avon, OH


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 10:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
You got it John, got your pm

Thanks Brad :)

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Wed Feb 06, 2008 11:08 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Ok so here's what we have so far,

JJ and Anthony's where pre-determined so their blocks where not in the 7 total.

John Elshaw 1 - 16"
GregH 1 - 16"
Skyhigh David 1 - 16" (by pm notice)
Lillian gets the 16" test block (by pm notice)

I'll get shipping and total payment info to you all by tomorrow night.

So that means I have 3 blocks left for the taking.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 12:36 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Shameless Bump :mrgreen:

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 2:40 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12973
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
nudge :D

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 2:43 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Thu Jan 24, 2008 7:59 am
Posts: 314
Location: Southwick,MA
City: Southwick, MA
;) , ;) ,nudge, nudge

_________________
Mitch


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 2:53 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 24, 2005 4:53 am
Posts: 1584
Location: PA, United States
Off topic...Is there a link to the O holy night song, can't find in search....

O, and helpful bump.... 8-)


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 3:26 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Oh Terry [uncle] I was looking for the song on the net this Christmas and had a hard time finding it....


But, I've dug a little further and well, you know I found it.

NOTE: YOU TAKE FULL RESPONSIBILITY FOR CLICKING THIS LINK. ALSO, BY CLICKING THE LINK BELOW YOU ARE REQUIRED OUT OF TOTAL OBLIGATION TO BUY ONE OF MY SANDING BLOCKS (ok, not really just being funny)

And now, I give you

Oh Holy Night

And don't make fun of my singing. I've givin it everything I've got ;) :o

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 4:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
[quote="Howard Klepper"I have a hypothesis about intuitive voicing. It's that people will voice a guitar so that it's voice resembles their own. More field work is needed to confirm or refute this hypothesis.[/quote]

[Quote WaddyT]
I am in Deep Doody then! [headinwall]

I think Rod is standing with me! :? :D :lol: :lol: :lol:

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 8:53 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Feb 24, 2005 4:53 am
Posts: 1584
Location: PA, United States
Thanks Rod, laughed so hard I cried and almost wet my pants :lol:


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 9:11 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12973
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Rod do you have any left?

_________________
Ann Arbor Guitars


Top
 Profile  
 
PostPosted: Thu Feb 07, 2008 11:23 pm 
Offline
Koa
Koa

Joined: Fri Jun 30, 2006 4:23 pm
Posts: 1694
Location: United States
First name: Lillian
Last Name: Fuller-Watson
State: WA
Country: USA
Focus: Build
Status: Amateur
Terry Stowell wrote:
Thanks Rod, laughed so hard I cried and almost wet my pants :lol:


Terry, you won't be the first one to have that problem. I didn't tell Sweetie what the link was when I sent it. I'll have make amends for that one later. The dogs are mad at me too.

Rod honey, the world can tell you gave it all you had right up to the very end. You are an amazing man, sending that out into the world for all to hear.

_________________
Aoibeann


Top
 Profile  
 
PostPosted: Fri Feb 08, 2008 2:44 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Hesh wrote:
Rod do you have any left?


Yes Hesh, I still have 2 blocks left. The router bit collet let loose a bit tonight when cutting one of the blocks so I'll keep that one as it's now 1-1/4" thick, unless someone wants a thinner one.

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson


Top
 Profile  
 
PostPosted: Fri Feb 08, 2008 9:38 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Mar 19, 2007 7:05 am
Posts: 9191
Location: United States
First name: Waddy
Last Name: Thomson
City: Charlotte
State: NC
Focus: Build
Status: Semi-pro
Hmmm, Compound Radius. You could get extra for that one. [:Y:] :D

_________________
Waddy

Photobucket Build Album Library

Sound Clips of most of my guitars


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 24 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: PGrubb and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com