| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Thickness sanding the harp top http://luthiersforum.com/forum/viewtopic.php?f=10101&t=18527 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sun Aug 24, 2008 11:12 pm ] |
| Post subject: | Thickness sanding the harp top |
I got some really pretty sitka from Shane. Finally got around to thicknessing it tonight. My Performax 10-20 did an awesome job. The thing that struck me was the initial thickness of the harp top boards. Each was more than .25" thick. Is that as thin as one will dare to cut a sitka board? Mike |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|