Official Luthiers Forum!
http://luthiersforum.com/forum/

picture of bridge plate needed
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=18788
Page 1 of 1

Author:  KenH [ Sun Sep 14, 2008 2:44 pm ]
Post subject:  picture of bridge plate needed

I have tried to see the pictures on frets.com, but for some reason my computer wont load the pictures from that site with firefox or IE7.

If someone would please go to THIS PAGE and post the pictures here I sure would appreciate it.

If you happen to have a picture of the bridge plate inside of a guitar with the strings and bridge pins in place that would do instead and is what I am really after.

Thanks in advance,
Ken

Author:  K.O. [ Sun Sep 14, 2008 3:28 pm ]
Post subject:  Re: picture of bridge plate needed

Ken I think we would need Frank Fords permission first to post from his pages, (copyright issues) I would think.

Author:  Rvsgtr [ Sun Sep 14, 2008 3:37 pm ]
Post subject:  Re: picture of bridge plate needed

If you're just looking for any guitar Bryan Kimsey has some good pics of his slotted bridgeplates vs unslotted. Some really good pics showing the advantages. Not sure if thats what you're looking for but its worth a look just to see his methods I think.

www.bryankimsey.com

Good luck
SR

Author:  David Collins [ Sun Sep 14, 2008 3:46 pm ]
Post subject:  Re: picture of bridge plate needed

Knowing the motive for your interest may help in finding the best shots, from angle to plate condition. Anyway, here's a few past discussions with some shots that I posted.

viewtopic.php?f=10101&t=18000

viewtopic.php?f=10102&t=15024

Author:  KenH [ Sun Sep 14, 2008 5:41 pm ]
Post subject:  Re: picture of bridge plate needed

I am trying to explain to someone whom I am training to build guitars the whole "torque" effect of bridges, the reason bridge plates are there and the differences in them. A picture is worth a thousand words.

I actually found what I was looking for at Brian Kimsey's site, which is the picture of the ball ends of the strings resting against the bridge plate. Thanks for the replies.

Author:  KenH [ Sun Sep 14, 2008 8:48 pm ]
Post subject:  Re: picture of bridge plate needed

David, THANKS!!!

That is the writeup I had seen earlier but couldnt remember where I had seen it. VERY good info indeed and THANKS for sharing it with us! I have bookmarked it now so that I can find it again if I ever need the info.

Author:  bluescreek [ Mon Sep 15, 2008 7:26 am ]
Post subject:  Re: picture of bridge plate needed

http://theunofficialmartinguitarforum.y ... opic/59809
here may be a link that will be of interest.
john hall

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/