Anyone have a picture of a Martin dovetail? Is there a mortised connection under the fingerboard as well or is the fingerboard glued to the top of the body? Thanks
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Martin Dovetail Question http://luthiersforum.com/forum/viewtopic.php?f=10101&t=19470 |
Page 1 of 1 |
| Author: | Ricardo [ Sun Nov 02, 2008 4:49 pm ] |
| Post subject: | Martin Dovetail Question |
Anyone have a picture of a Martin dovetail? Is there a mortised connection under the fingerboard as well or is the fingerboard glued to the top of the body? Thanks
|
|
| Author: | ChuckB [ Sun Nov 02, 2008 5:08 pm ] |
| Post subject: | Re: Martin Dovetail Question |
You can go on Martins website and look at a picture of a dovetail mortised neck block and a dovetail neck. On the website go to shop on line, then click on parts, this will bring you to kits, parts, accesories. Click on parts again. Scroll through to see pictures, since they do sell the parts. You will see that the fretboard is glued to the top. Chuck |
|
| Author: | Jody [ Sun Nov 02, 2008 5:50 pm ] |
| Post subject: | Re: Martin Dovetail Question |
the fingerboard is glued to the top plate... Jody |
|
| Author: | Pat Foster [ Sun Nov 02, 2008 8:50 pm ] |
| Post subject: | Re: Martin Dovetail Question |
Have a look at frets.com. I think Frank has some articles on dovetails - resets and whatnot. Pat |
|
| Author: | Michael Dale Payne [ Mon Nov 03, 2008 9:29 am ] |
| Post subject: | Re: Martin Dovetail Question |
As with any dovetail neck. the neck is joined via a tappered and fitted for alighnment dovetail the joint happens under the 14th and 15th or 12th and 13th fret positions but the fretboard its self is a flat plane joint. The fretboard glues flat to the neck and body top just as it would on a M&T joint. |
|
| Author: | Jimmy Caldwell [ Mon Nov 03, 2008 10:29 am ] |
| Post subject: | Re: Martin Dovetail Question |
Here are a couple of pics showing a typical dovetail neck joint. The tapered tenon on the neck fits into the mortise in the neck block and the fingerboard extension glues directly to the top. This is how Martin (and many others) have done it for 100+ years. Attachment: om281.jpg Attachment: om283.jpg
|
|
| Author: | Ricardo [ Mon Nov 03, 2008 1:40 pm ] |
| Post subject: | Re: Martin Dovetail Question |
Jimmy, very nice! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") Any issues with the "body hump transition"? Do you fret the fingerboard on the neck?
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|