I was splitting some brace logs and found one riddled with bearclaw. Side face looks pretty cool, at least for me
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Bearclaw bracing :D http://luthiersforum.com/forum/viewtopic.php?f=10101&t=23915 |
Page 1 of 1 |
| Author: | Alexandru Marian [ Fri Sep 25, 2009 5:20 am ] |
| Post subject: | Bearclaw bracing :D |
I was splitting some brace logs and found one riddled with bearclaw. Side face looks pretty cool, at least for me
|
|
| Author: | truckjohn [ Fri Sep 25, 2009 1:39 pm ] |
| Post subject: | Re: Bearclaw bracing :D |
Sounds like time to try out a 12-piece top... Good luck John |
|
| Author: | Joe Sustaire [ Fri Sep 25, 2009 4:16 pm ] |
| Post subject: | Re: Bearclaw bracing :D |
Very cool looking stuff Alexandru! Ought to be some possibilities there, at least for ukes. Joe |
|
| Author: | Edward Taylor [ Fri Sep 25, 2009 4:24 pm ] |
| Post subject: | Re: Bearclaw bracing :D |
Some repairman 50 years down the road is going to stick a mirror under there and be in awe 
|
|
| Author: | Alexandru Marian [ Sat Sep 26, 2009 12:40 am ] |
| Post subject: | Re: Bearclaw bracing :D |
Well yes the plan is to make larger surface braces, finish them to 600 grit and french polish them. The upgrade charge, some big $, because BC bracing is the ultimate in tone 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|