| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Cutting Tuning Machine Buttons/ one method http://luthiersforum.com/forum/viewtopic.php?f=10101&t=24746 |
Page 1 of 1 |
| Author: | Chris Paulick [ Tue Nov 24, 2009 1:25 am ] |
| Post subject: | Cutting Tuning Machine Buttons/ one method |
viewtopic.php?f=10117&t=24745&start=0 |
|
| Author: | MaxBishop [ Tue Nov 24, 2009 6:59 am ] |
| Post subject: | Re: Cutting Tuning Machine Buttons/ one method |
Hi Chris, Thanks for the video. Where did you get your foot switch? Thanks,Max |
|
| Author: | Chris Paulick [ Tue Nov 24, 2009 9:48 am ] |
| Post subject: | Re: Cutting Tuning Machine Buttons/ one method |
StewMac, Woodcraft and I get some from Harbor Freight. Some time I get on off foot switches in stead of monentary switches for other machines in the shop like my sanding station. I generally like using foot switches with my routers as well as my router table. I like the idea of having both hands on the router or work piece when turning them on and the idea of it acting like a deadman switch if something goes wrong. |
|
| Author: | MaxBishop [ Wed Nov 25, 2009 7:25 am ] |
| Post subject: | Re: Cutting Tuning Machine Buttons/ one method |
Thanks, Chris. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|