Before I go to "outside" sources, do any of the OLF sponsor have 20" diameter PSA sanding disks? 80 and 100 grit?
My old one is down to "smoking" off the wood rather than abrading it!
Thanks!
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| PSA sanding disks http://luthiersforum.com/forum/viewtopic.php?f=10101&t=24766 |
Page 1 of 1 |
| Author: | Hank Mauel [ Wed Nov 25, 2009 12:19 pm ] |
| Post subject: | PSA sanding disks |
Before I go to "outside" sources, do any of the OLF sponsor have 20" diameter PSA sanding disks? 80 and 100 grit? My old one is down to "smoking" off the wood rather than abrading it! Thanks! |
|
| Author: | SteveSmith [ Wed Nov 25, 2009 12:40 pm ] |
| Post subject: | Re: PSA sanding disks |
Check John Hall - I think he has 24". |
|
| Author: | Shane Neifer [ Wed Nov 25, 2009 12:41 pm ] |
| Post subject: | Re: PSA sanding disks |
Mine are 24" 80 grit. You could secure and then trim. They are $20 each. Blues Creek John has some as well that may be cheaper (less expensive..) than mine and he is in the US. Again though, they would be 24" diametre. Shane |
|
| Author: | Hank Mauel [ Wed Nov 25, 2009 12:57 pm ] |
| Post subject: | Re: PSA sanding disks |
Thanks. I hate to waste the extra size by trimming, but they may be less expensive than other sources and I'll be helping our gang. |
|
| Author: | bluescreek [ Wed Nov 25, 2009 4:18 pm ] |
| Post subject: | Re: PSA sanding disks |
I have 24 inch PSA , $18.25 on the site. 60-80-100 grit available thanks again for the kind works guys john hall |
|
| Author: | Ben Pak [ Wed Nov 25, 2009 6:57 pm ] |
| Post subject: | Re: PSA sanding disks |
Gizzly sells 20" psa in various grits. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|