| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Rosette Challenges http://luthiersforum.com/forum/viewtopic.php?f=10101&t=24776 |
Page 1 of 1 |
| Author: | TrueAxe [ Thu Nov 26, 2009 12:42 am ] |
| Post subject: | Rosette Challenges |
Hey guys I ran into a few challenges while making my rosette and I am wondering if you guys have any solutions for me. I realize that this might be partially my fault as I should have checked my shell for structural integrity issues before I started to inlay it. Either way when I was finished my rosette and doing the scraping and sanding I found a hole come out in one of the pieces and the corners of two that were thinner underneath have been sanded away. I really don't want to have to route out those pieces and replace them is there a way to cover up those little things? They are mega small so I think there should be a simple solution like fill with cyano or something lol. Thanks for the feedback! |
|
| Author: | TonyKarol [ Thu Nov 26, 2009 7:59 am ] |
| Post subject: | Re: Rosette Challenges |
I imagine that if the shell has holes, its likely paua ab .. if so, I use black dust and CA to fill .. or just fill totally with med CA clear. FYI - there is a small luthiers gathering this Saturday at the Moonshine Cafe in Oakville Ontario .. 3-6 pm, all welcome - 4 builders will be showing guitars |
|
| Author: | TrueAxe [ Thu Nov 26, 2009 2:51 pm ] |
| Post subject: | Re: Rosette Challenges |
Yea I know, Doug told us about a month ago and we will be there! Thats why I said in the pm see you saturday haha! So on that note, see you saturday! -Thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|