Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
AUCTION :: COCOBOLO http://luthiersforum.com/forum/viewtopic.php?f=10101&t=26757 |
Page 1 of 1 |
Author: | Brock Poling [ Sun Mar 28, 2010 8:19 pm ] |
Post subject: | AUCTION :: COCOBOLO |
This is a very nice set of Cocobolo with some beautiful beeswing figure and nice dark inklines. It is large enough for an OM. Retail value is $200, but a bid of $150 takes it and gets free domestic shipping. This auction end tomorrow (Monday) at 3PM EST. |
Author: | MiguelP [ Mon Mar 29, 2010 12:06 am ] |
Post subject: | Re: AUCTION :: COCOBOLO |
Man, all this wood is so nice!!!! $100.00 Miguel |
Author: | ChuckH [ Mon Mar 29, 2010 6:39 am ] |
Post subject: | Re: AUCTION :: COCOBOLO |
$105.00 |
Author: | MiguelP [ Mon Mar 29, 2010 8:30 am ] |
Post subject: | Re: AUCTION :: COCOBOLO |
Ok then, $110.00. Miguel |
Author: | Dave Anderson [ Mon Mar 29, 2010 10:23 am ] |
Post subject: | Re: AUCTION :: COCOBOLO |
I'll bid 120.00 |
Author: | MiguelP [ Mon Mar 29, 2010 10:26 am ] |
Post subject: | Re: AUCTION :: COCOBOLO |
$125.00 Miguel |
Author: | WaddyThomson [ Mon Mar 29, 2010 10:26 am ] |
Post subject: | Re: AUCTION :: COCOBOLO |
Biting my tongue! |
Author: | Randolph [ Mon Mar 29, 2010 12:57 pm ] |
Post subject: | Re: AUCTION :: COCOBOLO |
Brock, could you tell me the width of both the backs and sides, please? |
Author: | Brock Poling [ Mon Mar 29, 2010 1:31 pm ] |
Post subject: | Re: AUCTION :: COCOBOLO |
I am not close to them. However the centers are not cut straight, they are wider in the center and will need to be trimmed a bit before jointing. (I simulated this by overlapping them a bit in the picture). When I overlapped them they weren't quite big enough for a dread (but close). Sorry about that... I should have measured them. |
Author: | P@uL [ Mon Mar 29, 2010 2:00 pm ] |
Post subject: | Re: AUCTION :: COCOBOLO |
$135 |
Author: | Brock Poling [ Mon Mar 29, 2010 2:15 pm ] |
Post subject: | Re: AUCTION :: COCOBOLO |
P@uL wrote: $135 Thanks Paul... you're our winner. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |