| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| 1st attempt at resawing (pics) http://luthiersforum.com/forum/viewtopic.php?f=10101&t=27260 |
Page 1 of 1 |
| Author: | sprouseod [ Tue May 04, 2010 2:13 pm ] |
| Post subject: | 1st attempt at resawing (pics) |
Ended up with 8 sets of H. Mahogany, 2 sets of Wenge and 2 sets of Zircote. Thanks for all your help. Richard |
|
| Author: | Bobby M [ Tue May 04, 2010 2:41 pm ] |
| Post subject: | Re: 1st attempt at resawing (pics) |
Nice! Where did you find the billets for resaw if I may ask? |
|
| Author: | sprouseod [ Tue May 04, 2010 4:14 pm ] |
| Post subject: | Re: 1st attempt at resawing (pics) |
The mahogany I picked up from a cabinet guy that closed shop. The exotic came from a lumber warehouse just over the state line called Advantage Lumber R |
|
| Author: | Ken C [ Tue May 04, 2010 9:40 pm ] |
| Post subject: | Re: 1st attempt at resawing (pics) |
Nice stuff! Congrats on a successful resaw! I do a fair amount of resawing, in fact I had my 1/2" blade on over the weekend resawing a lacewood block into narrow slices for rosettes. I also have a few boards I'll be resawing into bindings this weekend. I don't have risers on my bandsaw, so I am limited to a 6" opening. I have a nice board of claro walnut I need to resaw, but it is too high for my saw. Ken |
|
| Author: | Steve Kinnaird [ Tue May 04, 2010 10:15 pm ] |
| Post subject: | Re: 1st attempt at resawing (pics) |
That Ziricote back...wow! Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|