I think he means 4" longer than the space between the decks. 4' is gonna be dangerous!
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Making gobars http://luthiersforum.com/forum/viewtopic.php?f=10101&t=28136 |
Page 1 of 1 |
| Author: | jac68984 [ Fri Jul 09, 2010 11:36 am ] |
| Post subject: | Making gobars |
Hi all. For those of you that make your own gobars from strips of wood, I was wondering what dimensions you try to shoot for. I've seen some pictures on here that look like some use about a 1/4 to 1/2 inch thick by 1/2 to 3/4 inch wide strips of oak. It's hard to estimate the true dimensions from the pictures though. Thanks. |
|
| Author: | Danny R. Little [ Fri Jul 09, 2010 11:52 am ] |
| Post subject: | Re: Making gobars |
I use red oak and make them 1/4" x 3/4" and 4' longer than the distance between decks. That's worked well for me. Danny R. Little |
|
| Author: | jac68984 [ Fri Jul 09, 2010 12:01 pm ] |
| Post subject: | Re: Making gobars |
That's what I needed to know. Thanks for the info. Aaron |
|
| Author: | WaddyThomson [ Fri Jul 09, 2010 12:51 pm ] |
| Post subject: | Re: Making gobars |
I think he means 4" longer than the space between the decks. 4' is gonna be dangerous!
|
|
| Author: | jac68984 [ Fri Jul 09, 2010 1:17 pm ] |
| Post subject: | Re: Making gobars |
Thanks for clearing that up Waddy. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|