| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Buffing http://luthiersforum.com/forum/viewtopic.php?f=10101&t=31668 |
Page 1 of 1 |
| Author: | Chris Ensor [ Tue Mar 29, 2011 5:20 pm ] |
| Post subject: | Buffing |
What size buff wheels do you use? What buff machine/arbor do you use? What is your favorite color? |
|
| Author: | woody b [ Tue Mar 29, 2011 5:35 pm ] |
| Post subject: | Re: Buffing |
I use a caswell 3/4 HP 1100 rpm buffing machine. http://www.caswellplating.com/buffs/34hpbuffkit.html I use wheels from 12" to 16" depending on the finish. |
|
| Author: | meddlingfool [ Tue Mar 29, 2011 6:38 pm ] |
| Post subject: | Re: Buffing |
Woody, what specific type of wheels are you using, and where are you getting them from? Thanks |
|
| Author: | woody b [ Wed Mar 30, 2011 6:09 pm ] |
| Post subject: | Re: Buffing |
meddlingfool wrote: Woody, what specific type of wheels are you using, and where are you getting them from? Thanks I use these 12" wheels from Caswell for Varnish, or Lacquer http://www.caswellplating.com/buffs/acrylic_buff.html I use these 17" (I said 16" in my original post) wheels from Grizzly for catalyzed Urethane. I had a local machine shop make the bigger center holes fit my buffer. http://www.grizzly.com/products/H5767 I use menzerna yellow and tan, after sanding to 1200 grit. I haven't done alot of experimenting with wheels, or compounds though. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|