| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| My dremel doesn't fit on stewmac router base http://luthiersforum.com/forum/viewtopic.php?f=10101&t=32853 |
Page 1 of 1 |
| Author: | Ti-Roux [ Wed Jul 13, 2011 9:26 am ] |
| Post subject: | My dremel doesn't fit on stewmac router base |
All is in the title... The threads seem to be different... It's a Dremel 400, 2010... Francis |
|
| Author: | Ti-Roux [ Wed Jul 13, 2011 9:58 am ] |
| Post subject: | Re: My dremel doesn't fit on stewmac router base |
It's a Dremel 400 XPR, exactly. Anybody had this problem? |
|
| Author: | Quine [ Wed Jul 13, 2011 1:50 pm ] |
| Post subject: | Re: My dremel doesn't fit on stewmac router base |
I had a similar problem with my old dremel...multipro395. It fit the threads but the chuck stuck out too far. I couldn't raise it up enough to use it. I got a model 300 now that fits fine. I think stew mac has a list of dremels that fit it |
|
| Author: | CharlieT [ Wed Jul 13, 2011 2:55 pm ] |
| Post subject: | Re: My dremel doesn't fit on stewmac router base |
Ti-Roux wrote: It's a Dremel 400 XPR, exactly. Anybody had this problem? I have the same Dremel and mine fits OK. I bought my StewMac base more that a year ago...I wonder if they have changed it since then. |
|
| Author: | AlBDarned [ Wed Jul 13, 2011 3:00 pm ] |
| Post subject: | Re: My dremel doesn't fit on stewmac router base |
if it's just a bit loose you could always try some plumber's teflon tape... |
|
| Author: | Ti-Roux [ Wed Jul 13, 2011 3:24 pm ] |
| Post subject: | Re: My dremel doesn't fit on stewmac router base |
AlBDarned wrote: if it's just a bit loose you could always try some plumber's teflon tape... No, it just don't get it. But I found a solution; not a really fancy one, but it works. I forced it, and the plastic thread took the shape of the metal one  . I cannot fit any other dremel accessories, but I don't care, I never use them.But I still don't understand the problem. |
|
| Author: | Dave Fifield [ Wed Jul 13, 2011 5:15 pm ] |
| Post subject: | Re: My dremel doesn't fit on stewmac router base |
Check and see if they sent you the base for the Foredom unit by mistake.... Edit - Oh, wait, they custom thread the Foredom unit to fit the Precision Router Base - so they are the same!! Maybe you just got a badly threaded one.... Cheers, Dave F. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|