| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Carbon fiber sheet source http://luthiersforum.com/forum/viewtopic.php?f=10101&t=33475 |
Page 1 of 1 |
| Author: | WilliamS [ Thu Sep 08, 2011 6:14 pm ] |
| Post subject: | Carbon fiber sheet source |
Hi. Any suggestions for a source for .03 unidirectional prepreg cf sheet material similar to what Jim Watts (Los Alamos) used to sell? I think the stuff LMI sells is similar but it looks like they only sell it in 1" wide strips I need at least 2 1/4". Thanks |
|
| Author: | DannyV [ Thu Sep 08, 2011 8:27 pm ] |
| Post subject: | Re: Carbon fiber sheet source |
Check with Dragon Plate. I just ordered some neck material and it was less than half the price of SM. They seem to carry a good variety of shapes and sizes. |
|
| Author: | WudWerkr [ Thu Sep 08, 2011 9:12 pm ] |
| Post subject: | Re: Carbon fiber sheet source |
+1 for Dragon Plate ! Have used them and have been very satisfied. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|