| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Woolson neck angle jig http://luthiersforum.com/forum/viewtopic.php?f=10101&t=33517 |
Page 1 of 1 |
| Author: | Steven Hornback [ Wed Sep 14, 2011 12:48 pm ] |
| Post subject: | Woolson neck angle jig |
I'm building the Woolson neck angle jig from the OLF plans I purchased last year and I'm wondering what the bolt that is mounted in the top of the aluminum bar is used for? Can anyone help? Thanks, Steve |
|
| Author: | Rod True [ Wed Sep 14, 2011 12:49 pm ] |
| Post subject: | Re: Woolson neck angle jig |
It adjusts to show the gap at the bridge location in relation to the plane of the upper bout (along the aluminum bar). Different folks use different gaps dependent on the scale and size of the guitar. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|