I got mine here http://brandingirons.com/ great people to work with, I supplied my own design, here's the finished product.
On spruce
On mahogany
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Branding Irons http://luthiersforum.com/forum/viewtopic.php?f=10101&t=34394 |
Page 1 of 1 |
| Author: | MikeyV [ Tue Nov 29, 2011 11:54 am ] |
| Post subject: | Branding Irons |
Where do you guys get those little branding irons made with your name, logo, etc to stamp the center strip inside the soundhole? I'd love to get one for my builds. Thanks! |
|
| Author: | Jim_H [ Tue Nov 29, 2011 12:01 pm ] |
| Post subject: | Re: Branding Irons |
Here is one place http://www.woodcraft.com/Search2/Search ... ing%20iron I'm sure there are others |
|
| Author: | Alex Kleon [ Tue Nov 29, 2011 12:06 pm ] |
| Post subject: | Re: Branding Irons |
Lee Valley Tools. http://www.leevalley.com/en/wood/page.a ... 3456,43462 Alex |
|
| Author: | Chas Freeborn [ Tue Nov 29, 2011 12:16 pm ] |
| Post subject: | Re: Branding Irons |
I got mine here. Based on a soldering iron heater element, any artwork you care to provide. http://www.brandnew.net -C |
|
| Author: | Rod True [ Tue Nov 29, 2011 1:59 pm ] |
| Post subject: | Re: Branding Irons |
I got mine here http://brandingirons.com/ great people to work with, I supplied my own design, here's the finished product. On spruce On mahogany
|
|
| Author: | MikeyV [ Wed Nov 30, 2011 3:39 pm ] |
| Post subject: | Re: Branding Irons |
Thanka a bunch guys, the links are exactly what I was looking for! I'm thinking of going with the fire heated one, it it easy to get repeatable results when heating the iron with, say, a torch? |
|
| Author: | Rod True [ Wed Nov 30, 2011 5:53 pm ] |
| Post subject: | Re: Branding Irons |
I bet a torch would take a fair amount of time to head up hot enough, I know plugging it in takes a good 10 mins.... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|