| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| which CF? http://luthiersforum.com/forum/viewtopic.php?f=10101&t=37278 |
Page 1 of 1 |
| Author: | Joe Sallis [ Mon Jul 30, 2012 5:01 am ] |
| Post subject: | which CF? |
Is this CF suitable for neck inserts? http://www.easycomposites.co.uk/Categor ... ction.aspx If not, what should I be looking for? |
|
| Author: | Joe Sallis [ Mon Jul 30, 2012 7:59 am ] |
| Post subject: | Re: which CF? |
I should mention that I intend to use them with a truss rod. It's so hard in the UK to buy stuff like this. If I have to order from US, where do people buy CF strips from? |
|
| Author: | Arnt Rian [ Mon Jul 30, 2012 8:24 am ] |
| Post subject: | Re: which CF? |
Those are hollow box sections, most folks use solid bars. Difficult to find in the UK maybe, but even more so up here in Norway, so I get mine from the US. Last time I bought from Dragonplate http://www.dragonplate.com/ |
|
| Author: | DannyV [ Mon Jul 30, 2012 11:18 am ] |
| Post subject: | Re: which CF? |
+1 for Dragonplate. Great service. If you buy the 48" bars http://www.dragonplate.com/ecart/categories.asp?cID=20 you can get 3 pieces on 12 fret necks for sure. Not sure about 14 fretters. Pretty inexpensive compared to some of the other suppliers. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|