| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Blades http://luthiersforum.com/forum/viewtopic.php?f=10101&t=37426 |
Page 1 of 1 |
| Author: | B. Howard [ Mon Aug 13, 2012 7:21 pm ] |
| Post subject: | Blades |
Here's a question for the inlay artists out there, where do you get your jewelers saw blades from? As always, thanks in advance. |
|
| Author: | Kevin Waldron [ Mon Aug 13, 2012 7:56 pm ] |
| Post subject: | Re: Blades |
Through the years have bought a number of different tools here. http://www.ottofrei.com/store/home.php Blessings, Kevin |
|
| Author: | bluescreek [ Mon Aug 13, 2012 8:14 pm ] |
| Post subject: | Re: Blades |
I get then from Germany through CPinlay in Malone NY |
|
| Author: | ernie [ Mon Aug 13, 2012 9:05 pm ] |
| Post subject: | Re: Blades |
rio grande jewellers supply abq new mexico |
|
| Author: | Jim Watts [ Tue Aug 14, 2012 1:07 am ] |
| Post subject: | Re: Blades |
Rio Grande, here too. Their Laser Gold blades are really good. http://www.riogrande.com/ |
|
| Author: | Joe Beaver [ Tue Aug 14, 2012 2:57 am ] |
| Post subject: | Re: Blades |
Not much of an artist but, Rio Grande also. I only order from them every five years or so but they are a great source for blades, handles, tweezers, silver, all the jewerly stuff. I also buy my small 1/8" shaft burrs from them. They have them in impossibly small sizes if you find yourself caught up in an intricate inlay pattern. They come in a pack like sewing needles. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|