Official Luthiers Forum!
http://luthiersforum.com/forum/

Grand auditorium Brace measurements
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=39084
Page 1 of 1

Author:  Lab [ Thu Jan 24, 2013 12:58 pm ]
Post subject:  Grand auditorium Brace measurements

Hi guys ....Hope someone can help.....I am building a Grand Auditorium using Acoustic Guitar Plans....The braces are supposed to be tapered..I want to scallop them. Any body have the measurements on the peak distances from the center of the X brace. also the measurements on the tone bar peaks....thanks

Author:  Lab [ Thu Jan 24, 2013 5:56 pm ]
Post subject:  Re: Grand auditorium Brace measurements

Similar to Taylor Grand auditorium...Sure would appreciate a reply...

Author:  Lab [ Thu Jan 24, 2013 8:15 pm ]
Post subject:  Re: Grand auditorium Brace measurements

Thanks Todd..I can come close to the measurements by your pic....Looks like the peak on the X brace lines up with the end of the lower tone bar...I Think i can also come close to the peaks on the tonebars......My top is .118" , The X brace is .600" , The tone bars are .500" and the fingerbraces are .300.....Thanks again, this helps

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/