Me too, but would be best to send it as an e-file, since I'm in Australia, and have a mate with a print shop
Costs alot to get anything from up there to down here....
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Woolsen neck jig plans? http://luthiersforum.com/forum/viewtopic.php?f=10101&t=39583 |
Page 1 of 1 |
| Author: | SKBarbour [ Sun Mar 03, 2013 7:44 pm ] |
| Post subject: | Woolsen neck jig plans? |
I've searched the forum with no luck. There's alot of talk about these jigs but nothing pointing to available plans anymore. Seems the olf had them available at some point. I would buy the Simpson jig but it seems quite a few people find the Woolsen easier to use. LMI offers plans and hardware for the jig but $115, seems alittle steep to me. Can anyone direct me to a set of plans or possibly have a set they would like to sell? thanks |
|
| Author: | Robbie_McD [ Sun Mar 03, 2013 7:57 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
PM Sent |
|
| Author: | SKBarbour [ Sun Mar 03, 2013 8:08 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Thanks Rob |
|
| Author: | LanceK [ Sun Mar 03, 2013 8:33 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
If there was enough interest I could look into printing a run of these? Sent from my iPhone using Tapatalk |
|
| Author: | George L [ Sun Mar 03, 2013 9:03 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Consider me interested. |
|
| Author: | Dan Miller [ Sun Mar 03, 2013 9:33 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
I'm interested... |
|
| Author: | MetalOne72 [ Sun Mar 03, 2013 10:22 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
I'm Interested |
|
| Author: | nickinbruns [ Sun Mar 03, 2013 10:43 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Me too, but would be best to send it as an e-file, since I'm in Australia, and have a mate with a print shop Costs alot to get anything from up there to down here.... |
|
| Author: | Shane Woonton [ Sun Mar 03, 2013 11:47 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Also interested. Also Southern Hemisphere. Emailed file preferred. Cheers, Shane |
|
| Author: | Rienk [ Mon Mar 04, 2013 12:16 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
I'd be interested in getting an E-file as well. FYI, I intend to design a system similar to the LMI unit, and if/when I do, I will make drawings available. I will also make drawings for a spanish style plate jointer, and a side bender available soon (have built a few, but want to work out the kinks). However, all of these will be dependent on having access to a cnc machine. I enjoy designing and building the tools, but i have no interest in getting side tracked with providing kits. Maybe someone else on the forum might be interested in doing a bunch and making kits available to others. |
|
| Author: | Steve Jeffries [ Tue Mar 05, 2013 10:03 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
I am interested as well. Count me in. |
|
| Author: | Sillwic9 [ Tue Mar 05, 2013 10:27 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
Count me in. Sent from right here. |
|
| Author: | ScooberJake [ Tue Mar 05, 2013 11:01 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
Me too. |
|
| Author: | Greg [ Tue Mar 05, 2013 9:57 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
I am in |
|
| Author: | deltawye [ Wed Mar 06, 2013 8:03 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
Me too. |
|
| Author: | LanceK [ Fri Mar 08, 2013 6:24 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Ok guys I'm on it |
|
| Author: | jwsamuel [ Sun Mar 10, 2013 8:39 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Hi...I am interested too. Jim |
|
| Author: | mzimbel [ Sun Mar 10, 2013 9:50 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Interested Sent from my iPad using Tapatalk HD |
|
| Author: | GHatcher [ Mon Mar 11, 2013 4:49 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
I am also interested and an e-file would be fine if it lowers the cost. |
|
| Author: | Doug Balzer [ Mon Mar 11, 2013 5:36 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Interested. |
|
| Author: | Steve Marcq [ Mon Mar 11, 2013 8:24 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
Me too... |
|
| Author: | LanceK [ Wed Mar 13, 2013 2:34 pm ] |
| Post subject: | Re: Woolsen neck jig plans? |
ORDER PAGE IS UP. Sticky at the top... |
|
| Author: | Florian Schneider [ Fri Mar 15, 2013 4:57 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
I'm also interested. Would prefer email, though.... Thanks ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | LanceK [ Fri Mar 15, 2013 9:50 am ] |
| Post subject: | Re: Woolsen neck jig plans? |
Florian Schneider wrote: I'm also interested. Would prefer email, though.... Thanks Florian the plans are only available in hard copy |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|