| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Making Thin, Precisely Thicknessed Wedges (Tutorials) http://luthiersforum.com/forum/viewtopic.php?f=10101&t=39796 |
Page 1 of 1 |
| Author: | Michaeldc [ Fri Mar 22, 2013 9:43 am ] |
| Post subject: | Re: Making Thin, Precisely Thicknessed Wedges (Tutorials) |
Too simple.. Thanks for sharing. Michael |
|
| Author: | Don Williams [ Fri Mar 22, 2013 10:22 am ] |
| Post subject: | Re: Making Thin, Precisely Thicknessed Wedges (Tutorials) |
It's so simple it's brilliant. |
|
| Author: | Pat Foster [ Fri Mar 22, 2013 11:12 am ] |
| Post subject: | Re: Making Thin, Precisely Thicknessed Wedges (Tutorials) |
Great idea, doubling the distance and height! Pat |
|
| Author: | Colin North [ Fri Mar 22, 2013 6:06 pm ] |
| Post subject: | Re: Making Thin, Precisely Thicknessed Wedges (Tutorials) |
Neat! |
|
| Author: | Spyder [ Fri Mar 22, 2013 11:21 pm ] |
| Post subject: | Re: Making Thin, Precisely Thicknessed Wedges (Tutorials) |
Very neat, thanks! I've been trying to figure out how to do this for a neck reset on an old mandolin-banjo. |
|
| Author: | murrmac [ Sun Mar 24, 2013 2:58 pm ] |
| Post subject: | Re: Making Thin, Precisely Thicknessed Wedges (Tutorials) |
Very clever method, Todd. I had to do this a while back and ended up freehanding it on my disc sander. Your procedure is way more satisfactory ...can't wait to try it out ... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|