+1,
Last year I asked John for some advice about the dovetail joint, and he was a tremendous help!
Thank you John, and all the marvellous luthiers that help each other on this forum
Q.
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| John Hall - a quick thank you http://luthiersforum.com/forum/viewtopic.php?f=10101&t=40251 |
Page 1 of 1 |
| Author: | John A [ Fri May 03, 2013 12:19 pm ] |
| Post subject: | John Hall - a quick thank you |
John, I wanted to offer you a quick thank you on the advice you gave me yesterday over the phone in bending some Honduran Rosewood. I bent the wood as you had explained to me, without a hitch (or crack or warping). I still have to touch it up on the pipe a little bit to have it fit my mold perfectly, but the help you gave me bending it on my form was perfect, spot on, as the brits say. I just wanted to say thank you publicly so the newer members know they can reach out to ask questions when they are in a bind. John Hall, Todd Stock, and I am sure many others have offered excellent help to me and many others out there. I am grateful for this and I have become a better builder through their guiding - Happy building, John Aguilera |
|
| Author: | quentinjazz [ Fri May 03, 2013 3:31 pm ] |
| Post subject: | Re: John Hall - a quick thank you |
+1, Last year I asked John for some advice about the dovetail joint, and he was a tremendous help! Thank you John, and all the marvellous luthiers that help each other on this forum Q. |
|
| Author: | EddieLee [ Fri May 03, 2013 5:02 pm ] |
| Post subject: | Re: John Hall - a quick thank you |
John has always been very gracious in answering all my questions. Many thanks. |
|
| Author: | bluescreek [ Fri May 03, 2013 6:50 pm ] |
| Post subject: | Re: John Hall - a quick thank you |
you guys is makin me blush you are all welcome I am here to help |
|
| Author: | NightOwl [ Sat May 04, 2013 2:14 am ] |
| Post subject: | Re: John Hall - a quick thank you |
Between your post here and on your forum and your videos I have learned a lot from you also. Will be spending money in your store soon ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") Thanks
|
|
| Author: | B. Howard [ Sat May 04, 2013 5:28 am ] |
| Post subject: | Re: John Hall - a quick thank you |
John is definitely "the man". |
|
| Author: | bluescreek [ Sat May 04, 2013 6:48 am ] |
| Post subject: | Re: John Hall - a quick thank you |
From John Waynes movie El Dorado " I have a host of Friends " thanks , all this means a lot to Brenda and I |
|
| Author: | Robbie_McD [ Sat May 04, 2013 7:06 pm ] |
| Post subject: | Re: John Hall - a quick thank you |
I recall my second build took about 200 hours (my first was a highly recommended LMI fully serviced kit) It took that long because I spent so much time viewing the excellent "how-to" videos by John, Todd, Chris..... Many thanks to these amazingly altruistic folks! PS: Johns video of blasting a 1" hole through the center of the radius dish and "driving the bus" for contouring the sides was brilliant! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|