Official Luthiers Forum!
http://luthiersforum.com/forum/

Source for 4" thick Honduran Mahogany
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=40439
Page 1 of 1

Author:  WalterJ [ Wed May 22, 2013 11:21 am ]
Post subject:  Source for 4" thick Honduran Mahogany

Hi all, I have found a source for 4" thick Honduran Mahogany $8.5 - $13.5 per board foot in North Carolina

Image

Image

Image

Image

Image

Image

They have a container load of 4" thick boards, mostly flatsawn 5"-7" widths- but I was able to find a couple of 9" wide quartersawn 96" long pieces. CITES papered, 8-11% mc. Very nice people to deal with and interested in becoming a forum sponsor.

Author:  sdsollod [ Wed May 22, 2013 12:41 pm ]
Post subject:  Re: Source for 4" thick Honduran Mahogany

Walter,
I'm in Raleigh. Where did you find it?
Steve

Author:  Pmaj7 [ Wed May 22, 2013 12:44 pm ]
Post subject:  Re: Source for 4" thick Honduran Mahogany

You mean 4/4? If thats honduran, it looks like gangbusters!

Author:  Ken McKay [ Wed May 22, 2013 3:09 pm ]
Post subject:  Re: Source for 4" thick Honduran Mahogany

Looks great, can you show a photo of the 4 inch thick stock. Those photos are not 4 inches.

Author:  Chris Pile [ Wed May 22, 2013 3:30 pm ]
Post subject:  Re: Source for 4" thick Honduran Mahogany

Looks lovely. I'm thinking a bunch of solidbodies!

Author:  AnthonyE [ Wed May 22, 2013 6:58 pm ]
Post subject:  Re: Source for 4" thick Honduran Mahogany

The grain is incredibly straight in that Mahogany. I also would love to know the source but assume that they probably don't ship. Stock that long and straight grained sawn on the quarter is very nice.

Author:  WalterJ [ Wed May 22, 2013 8:35 pm ]
Post subject:  Re: Source for 4" thick Honduran Mahogany

I bought it from Mr Brian Boggs (the chairmaker). Here's the invoice

Image


Ken McKay wrote:
Looks great, can you show a photo of the 4 inch thick stock. Those photos are not 4 inches.

Image

I wanted to see what's inside, so each plank was sawn down the middle.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/