| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Drum sander upgrade http://luthiersforum.com/forum/viewtopic.php?f=10101&t=40442 |
Page 1 of 1 |
| Author: | Michaeldc [ Wed May 22, 2013 7:49 pm ] |
| Post subject: | Drum sander upgrade |
Hello all I just upgraded to a Supermax 19-38 drum sander. The thing is a beast! Very stoked!! I have a Performax 16-32 sander looking for a home. If you're in Western Washington State and are looking for a sander, please PM me. Best, Michael |
|
| Author: | Josh H [ Wed May 22, 2013 8:31 pm ] |
| Post subject: | Re: Drum sander upgrade |
I'm a 16-32 user and am looking to upgrade down the road. I've read all the info on the 19-38 and can see some upgrades of the 16-32. From practical use where do you notice the biggest difference between these two sanders? Josh |
|
| Author: | Michaeldc [ Wed May 22, 2013 10:12 pm ] |
| Post subject: | Re: Drum sander upgrade |
Josh H wrote: I'm a 16-32 user and am looking to upgrade down the road. I've read all the info on the 19-38 and can see some upgrades of the 16-32. From practical use where do you notice the biggest difference between these two sanders? Josh I'll take a picture of them side by side.. |
|
| Author: | Dkeddy27 [ Thu May 23, 2013 4:50 am ] |
| Post subject: | Re: Drum sander upgrade |
How is the tracking on the infeed table behaving! I've been looking at drums sanders for awhile. It's getting old driving 4 miles to my buddies shop to use his! |
|
| Author: | micahmed [ Thu May 23, 2013 6:42 am ] |
| Post subject: | Re: Drum sander upgrade |
if you want you can just give it to me. ill even be a nice guy and pay shipping for you. |
|
| Author: | Michaeldc [ Thu May 23, 2013 8:59 am ] |
| Post subject: | Re: Drum sander upgrade |
Dkeddy27 wrote: How is the tracking on the infeed table behaving! I've been looking at drums sanders for awhile. It's getting old driving 4 miles to my buddies shop to use his! I've never had any trouble with the tracking. I set it up once, and that was it. These are very simple machines. |
|
| Author: | Jschlueter [ Thu May 23, 2013 10:30 am ] |
| Post subject: | Re: Drum sander upgrade |
Michael Colbert wrote: Dkeddy27 wrote: How is the tracking on the infeed table behaving! I've been looking at drums sanders for awhile. It's getting old driving 4 miles to my buddies shop to use his! I've never had any trouble with the tracking. I set it up once, and that was it. These are very simple machines. I have had the 19-38 for over a year and have had no tracking issues. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|