| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Quality Marquetry Banding http://luthiersforum.com/forum/viewtopic.php?f=10101&t=41632 |
Page 1 of 1 |
| Author: | wigglyworm [ Thu Oct 10, 2013 1:44 pm ] |
| Post subject: | Quality Marquetry Banding |
Hi all, Looking for high quality marquetry banding. Any thoughts? |
|
| Author: | Mike Collins [ Thu Oct 10, 2013 2:22 pm ] |
| Post subject: | Re: Quality Marquetry Banding |
www.karin-rost.com Nice stuff. Mike |
|
| Author: | Mark Fogleman [ Thu Oct 10, 2013 10:25 pm ] |
| Post subject: | Re: Quality Marquetry Banding |
http://www.inlaybanding.com/ Matt is a perfectionist and will do custom runs. |
|
| Author: | Barry Daniels [ Fri Oct 11, 2013 11:36 am ] |
| Post subject: | Re: Quality Marquetry Banding |
I bought some from Karin Rost for a special project and was very dissatisfied. The marquetry had several small pieces missing and the voids were filled with a rubbery glue that looked like dried rubber cement. If that is the type of glue they use to put the banding together, I would be worried about heat bending and long term strength. Also the shipping costs was very high from Germany. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|