Got these in from Aaron Hix today. Great stuff and should work perfectly. Excellent price as well. Thanks Aaron!
| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Who offers mahogany sides for laminating? http://luthiersforum.com/forum/viewtopic.php?f=10101&t=42558 |
Page 1 of 1 |
| Author: | ZekeM [ Sun Jan 26, 2014 7:24 pm ] |
| Post subject: | Who offers mahogany sides for laminating? |
I've been wondering about doing laminated sides for a while. I think I'm going to try it on my next build. I'd like to use hog for the inner lamination. Does anyone offer some 2nd grade sides only? I know LMI has EIR sides only available but I'd really like to use mahogany if I can find it. Any of our great sponsors offer it?? |
|
| Author: | ZekeM [ Sun Jan 26, 2014 7:43 pm ] |
| Post subject: | Re: Who offers mahogany sides for laminating? |
I really don't know anywhere local that sells mahogany. Anyone that could provide insight to exotic wood dealers in the mid tn area would also be appreciated. I order everything! |
|
| Author: | ZekeM [ Sun Jan 26, 2014 9:00 pm ] |
| Post subject: | Re: Who offers mahogany sides for laminating? |
Thanks Filippo. Clarksville is a bit of a drive but it's possibly close enough for a drive. I'll check em out. |
|
| Author: | wbergman [ Mon Jan 27, 2014 3:30 am ] |
| Post subject: | Re: Who offers mahogany sides for laminating? |
You might try using 1/16 veneer, for example at Constantine's. Current web site states out of stock until mid-January. There are other veneer suppliers that sell 1/16 veneer, too. |
|
| Author: | TRein [ Mon Jan 27, 2014 9:05 am ] |
| Post subject: | Re: Who offers mahogany sides for laminating? |
Four words: Hibdon Hardwood, OLF Sponsor |
|
| Author: | A.Hix [ Mon Jan 27, 2014 9:52 am ] |
| Post subject: | Re: Who offers mahogany sides for laminating? |
Zeke, I have several pallet loads of orphaned backs and sides. There are some really high grade Honduras mahogany sides in there. Not book matched, but for inside no worries, right? I'll sell sets of two sides for $10 plus shipping. |
|
| Author: | ZekeM [ Tue Feb 04, 2014 12:06 pm ] |
| Post subject: | Re: Who offers mahogany sides for laminating? |
Got these in from Aaron Hix today. Great stuff and should work perfectly. Excellent price as well. Thanks Aaron! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|