| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Kerfed linings and tentalones - two for one! http://luthiersforum.com/forum/viewtopic.php?f=10101&t=42931 |
Page 1 of 1 |
| Author: | Clay S. [ Sun Mar 09, 2014 5:14 pm ] |
| Post subject: | Kerfed linings and tentalones - two for one! |
I usually use reverse kerfed linings, but lately have been using tentalones to glue on the soundboard. Since I had to make some linings anyway, I decided I would go with the more typical type and use the off fall as my tentalones. I had a piece of pine cut at about the right angle to use as a fence on the bandsaw. A quick pass over the sander cleaned up the face of the kerfed linings. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|