| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Supermax 19-38 sander update http://luthiersforum.com/forum/viewtopic.php?f=10101&t=43177 |
Page 1 of 1 |
| Author: | Dkeddy27 [ Wed Apr 09, 2014 5:24 pm ] |
| Post subject: | Supermax 19-38 sander update |
I just received a new conveyor belt for my sander that is performing a lot better then the original conveyor belt! Supermax sent it to me for free admitting that the abrasive conveyor belt does not track very well. Anyone with this sander, I would strongly suggest taking advantage of getting a new conveyor belt through Supermax!  May your sails be full & your glass never be empty! |
|
| Author: | RustySP [ Wed Apr 09, 2014 7:44 pm ] |
| Post subject: | Re: Supermax 19-38 sander update |
Just got my SuperMax 19-38 a couple of weeks ago. So far no issues with the abrasive conveyor belt but I'll be on the look out. Btw, I love the machine and it's all I hoped it would be, But, the manual is horrible! And the open stand assembly instructions, someone should be horsewhipped! Too bad they don't do a DVD like my old WoodMaster Tools drum sander. Sent from my iPad using Tapatalk 2 |
|
| Author: | Dkeddy27 [ Wed Apr 09, 2014 9:08 pm ] |
| Post subject: | Re: Supermax 19-38 sander update |
The Supermax is a great machine, no doubt about it, but my abrasive conveyor belt would run to one side no matter how I would adjusted it!! I've had my machine for two years now and the conveyor belt has been a constant issue! I am so happy that this new rubber belt is working perfectly now! Supermax is a great company!! I just thought I would let other guys know that, if they had a problem, there is a fix for the conveyor belt tracking! May your sails be full & your glass never be empty! |
|
| Author: | Goodin [ Thu Apr 10, 2014 7:56 am ] |
| Post subject: | Re: Supermax 19-38 sander update |
Thanks for the advice. Currently, I don't have any issues with my conveyer belt. Supermax is a great company. Very friendly service and honest people. I ordered a few extra boxes of sandpaper and they forgot to send them, so they sent my order for free and a few extra boxes of sandpaper for free! The 19-38 was the best (and most!) money I have spent in my shop. |
|
| Author: | ernie [ Thu Apr 10, 2014 8:36 am ] |
| Post subject: | Re: Supermax 19-38 sander update |
I have a 20 yr old 16-32 performax . that has had the same problem for 20 yrs with tracking aaargh! |
|
| Author: | whiskywill [ Thu Apr 10, 2014 9:14 am ] |
| Post subject: | Re: Supermax 19-38 sander update |
ernie wrote: I have a 20 yr old 16-32 performax . that has had the same problem for 20 yrs with tracking aaargh! I have the same machine, but the Jet version, and have never had a problem with the tracking of the abrasive belt conveyor. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|