| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| EIR pyramid bridge http://luthiersforum.com/forum/viewtopic.php?f=10101&t=43184 |
Page 1 of 1 |
| Author: | stan thomison [ Thu Apr 10, 2014 7:00 pm ] |
| Post subject: | EIR pyramid bridge |
Need EIR pyramid bridge 2 1/4 pin spacing. Right now not have tools to make one. Stew Mac nor LMI apparently not sell them. Any help would be appreciated. Will post on classifieds also. See what happens when sell out shop and then need something. |
|
| Author: | SteveG [ Thu Apr 10, 2014 11:42 pm ] |
| Post subject: | Re: EIR pyramid bridge |
Andy Birko on the forum sells them for $29.50 for EIR. His website is : http://www.birkonium.com/product/pyramid-bridge-2/ Pretty hard to go wrong with Andy. cheers |
|
| Author: | wbergman [ Fri Apr 11, 2014 4:38 am ] |
| Post subject: | Re: EIR pyramid bridge |
http://www.ebay.com/sch/i.html?_trksid= ... &_from=R40 On ebay from China there are many in various species. They are cheap, but maybe the quality is, too. Seems to me the previous posts about CITES might apply. |
|
| Author: | klooker [ Fri Apr 11, 2014 7:43 am ] |
| Post subject: | Re: EIR pyramid bridge |
+1 for Andy. I was able to check out some of his bridges in person & they're awesome. The finish off his machine(s) is very good, maybe a little 320 grit & finer then they're done. Kevin Looker |
|
| Author: | stan thomison [ Fri Apr 11, 2014 8:30 am ] |
| Post subject: | Re: EIR pyramid bridge |
ordered one from Andy. First time in years I have had to buy a bridge. |
|
| Author: | Haans [ Fri Apr 11, 2014 9:11 am ] |
| Post subject: | Re: EIR pyramid bridge |
I've bought some of the ebay ebony ones in the past and there is nothing wrong with them. Pin spacing if I recall is 2-3/8" though... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|