| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| ResawBandsaw Blades http://luthiersforum.com/forum/viewtopic.php?f=10101&t=43188 |
Page 1 of 1 |
| Author: | ernie [ Fri Apr 11, 2014 3:48 pm ] |
| Post subject: | ResawBandsaw Blades |
I/m not getting paid for this  , but just got off the phone with a friend who has a bandsaw mill and does a fair amount of resawing logs.He suggested using sawblade express in pevely MO. he says their resaw blades (carbon steeel) last longer than others.Had a quick look , their prices are about $7 cheaper than my local woodcraft.
|
|
| Author: | bluescreek [ Fri Apr 11, 2014 5:44 pm ] |
| Post subject: | Re: ResawBandsaw Blades |
there are many different blades and tooth grinds. What is the kerf what is the blade width I like my woodmaster and have tried many blades and for my needs this is the best one for my application. |
|
| Author: | ernie [ Fri Apr 11, 2014 5:48 pm ] |
| Post subject: | Re: ResawBandsaw Blades |
Check the website if your interested ,It seems from what I looked at , that their blades are meant for consumer grade bandsaws in the 9 to 18in range and a seperate price for custom blades. |
|
| Author: | Joe Beaver [ Mon Apr 14, 2014 12:22 pm ] |
| Post subject: | Re: ResawBandsaw Blades |
Carbide blade for sure. I use to use HSS blades, what a difference the carbide made!!! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|