| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| NEW OLF NECK Jig Plans! Beta testers needed! http://luthiersforum.com/forum/viewtopic.php?f=10101&t=45342 |
Page 1 of 1 |
| Author: | LanceK [ Fri Mar 13, 2015 7:27 am ] |
| Post subject: | NEW OLF NECK Jig Plans! Beta testers needed! |
Paul Woolson and I have teamed up to rewrite and offer the old OLF Neck Jig plans we use to have. Paul thought they were not as clearly defined as they could be. So he has rewritten them to be easier to understand and build. What we would like to do before offering them to the OLF is have a few folks beta test them. We know the jig works as written, but we cannot anticipate what questions people might have. We would like to include a step by step. So, if you are interested in building this jig we will supply you with a free set of plans, and a BIG public Thanks for helping develop them. Here is what the jig looks like. You fasten your neck to the jig on the under side, place the body on the top side and the arm will touch the bridge location tilting the neck in to the proper angle. You then lock the neck down and cut your tennon. Pretty sweet actually. If I have not explained it clear enough, maybe Paul will jump in. Attachment: simpson neck jig.rvt].png If you are interested please contact me at lance@kragenbrinkguitars.com |
|
| Author: | Pwoolson [ Fri Mar 13, 2015 11:30 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
Hello all. The last batch of drawings left a little (lot) to be desired. I originally modeled the jig in Rhino which is a 3D industrial design program. The guy that was drawing them for Lance didn't have Rhino so we did a lot of talking/explaining/etc over the phone to get the plans accurate. When the plans were originally released, I got a lot of phone calls and emails asking me to explain things. I really couldn't understand why folks were having such issues building this jig, especially if they wanted to build guitars. Then I saw the plans for the first time a few weeks ago...YIKES. Even I had troubles understanding them and I designed the darn thing. I can understand why there was so much confusion. So I re-drew them, along with some subtle design changes, to make it better. I found this process quite difficult as I was trying to anticipate the questions that might be asked and the clarity that would need to be achieved. I asked Lance what he thought about having a couple of folks try them out and build this design from the plans as I have them now. Maybe write down questions, or email me directly about any thoughts as the process goes on. I'll log those thoughts/questions and do my best to make the plans more clear to everyone. I hope this will make a design that is much easier to understand. Thanks, Paul |
|
| Author: | LanceK [ Fri Mar 13, 2015 11:37 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
Thanks Paul! As of right now we have three folks signed up. One or two more would be great! |
|
| Author: | rlrhett [ Fri Mar 13, 2015 4:13 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I'll be happy to build it, although I haven't the foggiest idea how it would work from that jpeg. I have a cnc machine, so cutting the parts to spec shouldn't be a problem. BTW I also have Rhino, so you wouldn't need to change the format to Autocad or Solidworks. |
|
| Author: | Wes Paul [ Fri Mar 13, 2015 9:20 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I need to build a neck jig. |
|
| Author: | Dave Livermore [ Fri Mar 13, 2015 10:12 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
Count me in. Definitely need to do something different in how I make my tenon/mortise. Dave |
|
| Author: | Rod True [ Sat Mar 14, 2015 12:16 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I already made one off the old plans (my mechanical design helped fill in the blanks). If I can make a suggestion just looking at the rendering, the two "blocks" where the angle adjustment are, I know making a triangle makes for practical material cutting but a sharp point like that is bound to take an eye out  Make it "rectangular" in shape with the end a half circle..... It's a great jig!!! Thanks Paul. |
|
| Author: | Randolph [ Sat Mar 14, 2015 4:47 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I have a set of the old plans. I am usually really good at reading plans but I did find it difficult. I started a thread here to see if anyone could help but got nothing. I think one of the most helpful things for me would be to have a couple of pictures of the jig with and without a guitar hooked into it so I could physically see what it is supposed to look like. I am very excited that there is a new push to make these plans go. I am a little busy right now to commit to building one but if you still have the need in a couple of weeks let me know. I should be more free. You can definitely count me in on one of the new sets when they are ready! |
|
| Author: | H3ytm@n [ Sun Mar 15, 2015 5:14 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I need to rebuilt mine anyway so more than happy to be a beta tester. Cheers |
|
| Author: | surveyor [ Sun Mar 15, 2015 9:38 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I built this one a couple of years back, sure could have used a plan then. I copied it from an L.M.I. video by Robbie O'Brien. |
|
| Author: | Mike OMelia [ Sun Mar 15, 2015 12:25 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I'm always interested in helping. |
|
| Author: | LanceK [ Mon Mar 16, 2015 11:48 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
Thanks everybody! It will be a few weeks to get the plans printed. Then I will contact you regarding addresses and sending the plans out. Thanks again for your help! |
|
| Author: | rlrhett [ Mon Mar 16, 2015 12:05 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
FWIW: I prefer digital plans. Don't waste the paper or postage. If you don't want to send me the editable CAD files, feel free to send a PDF. Thanks! Sent from my iPhone using Tapatalk |
|
| Author: | Linus [ Mon Mar 16, 2015 1:15 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
Is it too late for me to get in on it? I need a neck joint jig. |
|
| Author: | GHatcher [ Tue Mar 17, 2015 7:08 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
At my slow rate of building things, I am probably not a good beta tester. But I did buy the previous plans and agree more instructions and tips would be great. |
|
| Author: | GRS [ Wed Mar 18, 2015 8:34 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
If you still need people, I'd be interested too. Thanks Gary |
|
| Author: | Phil J [ Wed Mar 18, 2015 7:51 pm ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
I would also be interested if its not too late. I also second the idea of emailing a pdf file, make it easier for everyone I would think. |
|
| Author: | LanceK [ Thu Mar 19, 2015 7:42 am ] |
| Post subject: | Re: NEW OLF NECK Jig Plans! Beta testers needed! |
Right now we have all the testers needed. My next step is to get the plans printed which including shipping should take a week or so. Ill keep everyone updated in this thread. Once we are happy with the testing and have made any changes ill do a big pre order, after that ill just keep some in stock. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|