| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Anyone used this for filling ebony pinholes? http://luthiersforum.com/forum/viewtopic.php?f=10101&t=45432 |
Page 1 of 1 |
| Author: | meddlingfool [ Thu Mar 26, 2015 4:29 pm ] |
| Post subject: | Anyone used this for filling ebony pinholes? |
|
|
|
| Author: | Joe Beaver [ Thu Mar 26, 2015 5:38 pm ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
Not me, just CA with ebony dust. Or sometimes ebony dust mixed with titebond |
|
| Author: | Tai Fu [ Thu Mar 26, 2015 7:20 pm ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
Black epoxy works real well too |
|
| Author: | Joe Beaver [ Thu Mar 26, 2015 10:42 pm ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
Have you tried it yet Ed? It might be ok |
|
| Author: | Haans [ Fri Mar 27, 2015 6:34 am ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
Many years ago I bought a quart jar of black pastel powder at the local art store. Still have half of it all these years later. Mix with epoxy and it's black as coal. |
|
| Author: | Michael.N. [ Fri Mar 27, 2015 6:44 am ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
Ebony dust, Lamp Black, Bitumen Earth Pigment. All send your glue/filler pretty Black looking. You could try mixing them, for that very exact shade of Black! |
|
| Author: | meddlingfool [ Fri Mar 27, 2015 10:29 am ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
No, haven't tried it yet... |
|
| Author: | ernie [ Sat Mar 28, 2015 7:48 am ] |
| Post subject: | Re: Anyone used this for filling ebony pinholes? |
black shellac stick , melted, or ebony dust /hhg/fish |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|