Official Luthiers Forum!
http://luthiersforum.com/forum/

reinforce logo veneer
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=46360		 Page 1 of 1
Author:  mikemcnerney [ Mon Sep 14, 2015 4:56 pm ]
Post subject:  reinforce logo veneer
I want to reinforce (Harden ?) some hardwood veneers to saw my logo (1.2" x .7"), for my headstock.
I tried gluing it today on to a backing piece of laminate impregnated craft paper but it still broke when working on it.
I am wondering about saturating it with super glue or epoxy. Any ideas
MM
Author:  Alex Kleon [ Mon Sep 14, 2015 6:03 pm ]
Post subject:  Re: reinforce logo veneer
1/64" birch ply. I'm using some as a backer for a spalted maple rosette. I bought it at Michael's craft store, but I'm sure any craft store will sell it.

Alex
Author:  mikemcnerney [ Mon Sep 14, 2015 7:00 pm ]
Post subject:  Re: reinforce logo veneer
I like the sound of that!
MM
Author:  Alex Kleon [ Mon Sep 14, 2015 7:51 pm ]
Post subject:  Re: reinforce logo veneer
mikemcnerney wrote:
I like the sound of that!
MM


..... until you see the price! 2@1/64"x6"x12"=$19.00 wow7-eyes I'd like to claim ownership to it's use, but like most ideas, I read it on the OLF! :D

Alex
Author:  kencierp [ Tue Sep 15, 2015 11:27 am ]
Post subject:  Re: reinforce logo veneer
http://shop.balsausa.com/product_p/b333.htm
Author:  DannyV [ Tue Sep 15, 2015 11:49 am ]
Post subject:  Re: reinforce logo veneer
More veneer. 1 or 2 more layers and run the grain opposing.
Author:  petguitars [ Sat Sep 19, 2015 8:19 am ]
Post subject:  Re: reinforce logo veneer
Try LMI's fiber. You can get it in .010, .015, .020, .030 thicknesses. Very tough stuff. We use it all the time.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/