| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Modifying a neck joint http://luthiersforum.com/forum/viewtopic.php?f=10101&t=47259 |
Page 1 of 1 |
| Author: | CameronBeyer [ Fri Feb 12, 2016 1:40 pm ] |
| Post subject: | Modifying a neck joint |
I was curious if anyone knew if there would be any negative repercussions from re-shaping a blocky schecter omen 8 neck joint down to be similar to that of the joint of a more ergonomic Ibanez S profile. Also what would be the best way to go about this? |
|
| Author: | Chris Pile [ Fri Feb 12, 2016 3:25 pm ] |
| Post subject: | Re: Modifying a neck joint |
Are we talking neck mods, body mods, or both? I'm not completely familiar with either of those instruments. You can probably use a file and/ or sandpaper - provided you don't get carried away. PICS? |
|
| Author: | CameronBeyer [ Fri Feb 12, 2016 4:09 pm ] |
| Post subject: | Re: Modifying a neck joint |
I'm Just talking about Body Mods, the body style of the guitar is a super strat shape and is a bolt on. But because of the normal super strat style neck bolt that's a bit wider due to the neck size of the 8 string. So theres basically a massive squared block stopping me from comfortably playing the higher frets. And I was thinking I could chop half the block off and round it out to be more ergonomic. (and sorry i can't really post pictures due to the fact that for some reason my phones photos are too large of a file size) |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|