| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Of interest to Enduro Var users? http://luthiersforum.com/forum/viewtopic.php?f=10101&t=47414 |
Page 1 of 1 |
| Author: | Colin North [ Tue Mar 08, 2016 8:48 am ] |
| Post subject: | Of interest to Enduro Var users? |
Found this in the FAQs on General Finishes site. https://generalfinishes.com/faq/how-do-i-repair-a-section-that-i-have-buffed-through-on-a-guitar-that-i-am-finishing-using-endur Strange, I remember this post quoting Tom Monahan of General Finishes saying the exact opposite. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=46208&p=612346&hilit=+enduro+epoxy#p612346 Me and a few others had no problems with Z poxy and west systems. 
|
|
| Author: | kencierp [ Tue Mar 08, 2016 9:43 am ] |
| Post subject: | Re: Of interest to Enduro Var users? |
Ain't that something! I'll contact John Greven but I think he's been using epoxy filler all along. I believe the issue of witness lines when cutting down to bare wood (removing the pore filler film) is problematic with just about any coating even nitro lacquer. I am only doing friends and family builds these days so I plan to continue on with Zpoxy -- I did primitive mechanical bond tests with tape and the Enduro does does not budge. |
|
| Author: | Colin North [ Tue Mar 08, 2016 9:50 am ] |
| Post subject: | Re: Of interest to Enduro Var users? |
Silvertip epoxy or something like that? |
|
| Author: | bcombs510 [ Tue Mar 08, 2016 10:15 am ] |
| Post subject: | Re: Of interest to Enduro Var users? |
Funny, that was a conversation that I had with them a while back. I had buffed through the Endurovar and hit the Z-Poxy. I followed the guidance given here in the OLF and the guitar turned out great. I just scuff sanded the back and shot the whole thing with 5 more coats, leveled and then buffed. |
|
| Author: | Colin North [ Tue Mar 08, 2016 10:31 am ] |
| Post subject: | Re: Of interest to Enduro Var users? |
There you go!! Thanks Brad. Still using EV? |
|
| Author: | bcombs510 [ Tue Mar 08, 2016 11:00 am ] |
| Post subject: | Re: Of interest to Enduro Var users? |
Colin North wrote: There you go!! Thanks Brad. Still using EV? Yep. I'm shooting satin EnduroVar on the neck now per the suggestion where I was asking what to use on a neck (I was looking at truoil and Liberon). I settled on the Satin Endurovar. It's curing now. |
|
| Author: | Colin North [ Tue Mar 08, 2016 11:08 am ] |
| Post subject: | Re: Of interest to Enduro Var users? |
bcombs510 wrote: Colin North wrote: There you go!! Thanks Brad. Still using EV? Yep. I'm shooting satin EnduroVar on the neck now per the suggestion where I was asking what to use on a neck (I was looking at truoil and Liberon). I settled on the Satin Endurovar. It's curing now. Let's know how it goes please. I'll be trying EV matt. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|