Official Luthiers Forum!
http://luthiersforum.com/forum/

Something I started doing with my jigs
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=48442		 Page 1 of 1
Author:  patch [ Sat Oct 22, 2016 8:14 pm ]
Post subject:  Something I started doing with my jigs
I've been putting threaded inserts into my bench then drilling corresponding holes into my jigs so that I can screw them down to my workbench. This way I don't have clamps in the way and the jig isn't going anywhere. I'm finding it super handy maybe someone else will too.
Author:  SteveSmith [ Sat Oct 22, 2016 9:37 pm ]
Post subject:  Re: Something I started doing with my jigs
I've done several like that- works great!
Author:  meddlingfool [ Sat Oct 22, 2016 11:23 pm ]
Post subject:  Re: Something I started doing with my jigs
Rock solid!
Author:  doncaparker [ Sun Oct 23, 2016 12:06 am ]
Post subject:  Re: Something I started doing with my jigs
I have dog holes in my bench, so I put the threaded inserts in the jigs and put jig knobs with 2" bolts through the bottom of the bench into the jigs.
Author:  Mike Collins [ Sun Oct 23, 2016 12:50 pm ]
Post subject:  Re: Something I started doing with my jigs
a truly great tip Patch.
Mike
Author:  Carey [ Mon Oct 24, 2016 4:11 am ]
Post subject:  Re: Something I started doing with my jigs
patch wrote:
I've been putting threaded inserts into my bench then drilling corresponding holes into my jigs so that I can screw them down to my workbench. This way I don't have clamps in the way and the jig isn't going anywhere. I'm finding it super handy maybe someone else will too.


Yes, this is a real good idea.. I was going to do something a bit more complicated, but your way
sounds better- thanks!

-CW
Author:  sdsollod [ Mon Oct 24, 2016 7:54 am ]
Post subject:  Re: Something I started doing with my jigs
Great idea! Simple and effective...
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/