| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Slotted Headstock Thickness? http://luthiersforum.com/forum/viewtopic.php?f=10101&t=48616 |
Page 1 of 1 |
| Author: | Fasterthanlight [ Tue Nov 29, 2016 6:36 pm ] |
| Post subject: | Slotted Headstock Thickness? |
How thick should a slotted headstock for a steelstring be? Thicker that a non-slotted? Thanks in advance folks... FTL |
|
| Author: | Terence Kennedy [ Tue Nov 29, 2016 6:40 pm ] |
| Post subject: | Re: Slotted Headstock Thickness? |
3/4" for me. |
|
| Author: | Fasterthanlight [ Tue Nov 29, 2016 6:42 pm ] |
| Post subject: | Re: Slotted Headstock Thickness? |
Including veneer right? |
|
| Author: | TonyKarol [ Tue Nov 29, 2016 6:48 pm ] |
| Post subject: | Re: Slotted Headstock Thickness? |
depends on the tuners you use, plus what kind of treatment you want to do on the edges, ie. how much of a chamfer .... most slot head tuners need at least .750 ... I use .800 ... |
|
| Author: | Colin North [ Tue Nov 29, 2016 6:48 pm ] |
| Post subject: | Re: Slotted Headstock Thickness? |
Depends on the tuner plate. |
|
| Author: | Colin North [ Tue Nov 29, 2016 6:49 pm ] |
| Post subject: | Re: Slotted Headstock Thickness? |
Got beaten to it, just! |
|
| Author: | Fasterthanlight [ Tue Nov 29, 2016 7:12 pm ] |
| Post subject: | Re: Slotted Headstock Thickness? |
Cool, thanks |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|