| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Headstock backstrap http://luthiersforum.com/forum/viewtopic.php?f=10101&t=49076 |
Page 1 of 1 |
| Author: | cablepuller1 [ Wed Mar 01, 2017 1:36 am ] |
| Post subject: | Headstock backstrap |
Hi Does anyone put a backstrap plate with a round volute on there acoustics, if that makes sense. I have the volute lip and not shaped neck yet, now im not sure whether it's best to carve the semi circle and round the neck before glueing on the veneers or shape it in after. What order do you do yours?  Sent from my D6603 using Tapatalk |
|
| Author: | cablepuller1 [ Wed Mar 01, 2017 1:41 am ] |
| Post subject: | Re: Headstock backstrap |
Another pic to help explain   Sent from my D6603 using Tapatalk |
|
| Author: | meddlingfool [ Wed Mar 01, 2017 3:53 am ] |
| Post subject: | Re: Headstock backstrap |
After... |
|
| Author: | Colin North [ Wed Mar 01, 2017 4:05 am ] |
| Post subject: | Re: Headstock backstrap |
After here too. |
|
| Author: | Arnt Rian [ Wed Mar 01, 2017 4:34 am ] |
| Post subject: | Re: Headstock backstrap |
After. I made a tutorial some years back, that shows how I make both a volute type backstrap and one that extends down the back of the neck. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25874&p=348625&hilit=volute#p348625 |
|
| Author: | Clinchriver [ Wed Mar 01, 2017 5:47 am ] |
| Post subject: | Re: Headstock backstrap |
Arnt Rian wrote: After. I made a tutorial some years back, that shows how I make both a volute type backstrap and one that extends down the back of the neck. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25874&p=348625&hilit=volute#p348625 Excellent tut's, also thats one answer to the nut slot question earlier this week. |
|
| Author: | cablepuller1 [ Wed Mar 01, 2017 7:59 am ] |
| Post subject: | Re: Headstock backstrap |
Arnt Rian wrote: After. I made a tutorial some years back, that shows how I make both a volute type backstrap and one that extends down the back of the neck. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25874&p=348625&hilit=volute#p348625 Thanks Arnt  Sent from my D6603 using Tapatalk |
|
| Author: | dzsmith [ Wed Mar 01, 2017 9:56 pm ] |
| Post subject: | Re: Headstock backstrap |
After. The only reason I ever use a volute is to give the backstrap veneer a defned edge to sand to. I pull the volute about an inch away from the nut. I don't like my hand running into the volute. |
|
| Author: | GustavBuhund [ Thu Mar 02, 2017 10:05 pm ] |
| Post subject: | Re: Headstock backstrap |
After, without a doubt |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|