| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| Gibson B-25 http://luthiersforum.com/forum/viewtopic.php?f=10101&t=49159 |
Page 1 of 1 |
| Author: | Mike OMelia [ Sun Mar 19, 2017 6:19 pm ] |
| Post subject: | Gibson B-25 |
Is there are away to replace logo paint on pickguard? I can see the print location, white paint gone. |
|
| Author: | RusRob [ Mon Mar 20, 2017 7:47 am ] |
| Post subject: | Re: Gibson B-25 |
Most likely it was a silkscreen. Google "home made silk-screening and you will find many ways to do it. Or you could find the logo (again Google it) in a vector graphics format (scalable without loosing resolution), take it to a sign make that does vinyl graphics and have them cut it out on a plotter, You can either have them make a positive and just stick it to the PG or have them print the reverse and use it as a stencil and spray it on. The latter is how I have reproduced logos in the past using an airbrush and lacquer with excellent results. here is an example of the last one I did. Hope this helps, Bob |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|