Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
Delta drum sander spring clips... http://luthiersforum.com/forum/viewtopic.php?f=10101&t=49586 |
Page 1 of 1 |
Author: | meddlingfool [ Mon Jul 24, 2017 5:43 pm ] |
Post subject: | Delta drum sander spring clips... |
So the sandpaper attachment clip,on my sander broke. Anyone know where to get replacement parts? Looked online but only found 'obsolete/sold out'. I'm wondering, since many different brands are made in the same Chinese factories, if another company used the same drum/spring clip system? Anyone have any info? |
Author: | Alex Kleon [ Mon Jul 24, 2017 7:15 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
Call or email Delta directly, Ed. I did that once for planer parts, and they came through for me. Alex |
Author: | Bri [ Mon Jul 24, 2017 7:28 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
Take a pic and I will see if the supermax is similar. B |
Author: | SteveSmith [ Tue Jul 25, 2017 5:32 am ] |
Post subject: | Re: Delta drum sander spring clips... |
I've also had good luck getting parts directly from Delta. |
Author: | SnowManSnow [ Thu Jul 27, 2017 6:46 am ] |
Post subject: | Re: Delta drum sander spring clips... |
I've gotten delta parts new from eBay sellers too. Just search for the part number and see what pops up Sent from my iPhone using Tapatalk Pro |
Author: | meddlingfool [ Thu Jul 27, 2017 1:17 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
The problem is the machine is discontinued and the parts obsolete... |
Author: | SteveSmith [ Fri Jul 28, 2017 1:23 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
I'm assuming you have tried an internet search for "Delta part number xxxxx" ? Sometimes the odd distributor might still have some parts. Since you probably already did that then finding a similar unit is your best bet. |
Author: | DannyV [ Sat Jul 29, 2017 12:46 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
What's wrong with duct tape? You're Canadian. I'm not really joking. I've used it because the ones on my General are so crappy. |
Author: | Jim Watts [ Sat Jul 29, 2017 6:29 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
I believe there are kits to convert it to hook and loop if you wanted. Perhaps Klingspore has the stuff. |
Author: | Mike OMelia [ Sun Jul 30, 2017 3:54 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
ereplacementparts.com |
Author: | Imbler [ Sun Jul 30, 2017 5:35 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
Mike O'Melia wrote: ereplacementparts.com Good suggestion Mike; I've used them for many a part that everyone else says is obsolete/unavailable. Recently got a rocker cover for a 4 stroke string trimmer ($$), that everyone including the oem said was obsolete. They were inexpensive, and shipped quickly. Without it the machine was unusable. |
Author: | meddlingfool [ Mon Aug 28, 2017 6:45 pm ] |
Post subject: | Re: Delta drum sander spring clips... |
Renovo parts did the trick, got half a dozen, so should be good for a while. Even managed to install the thing properly. Guess the vacation is over:) |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |