Official Luthiers Forum!
http://luthiersforum.com/forum/

Delta drum sander spring clips...
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=49586
Page 1 of 1

Author:  meddlingfool [ Mon Jul 24, 2017 5:43 pm ]
Post subject:  Delta drum sander spring clips...

So the sandpaper attachment clip,on my sander broke. Anyone know where to get replacement parts? Looked online but only found 'obsolete/sold out'.

I'm wondering, since many different brands are made in the same Chinese factories, if another company used the same drum/spring clip system?

Anyone have any info?

Author:  Alex Kleon [ Mon Jul 24, 2017 7:15 pm ]
Post subject:  Re: Delta drum sander spring clips...

Call or email Delta directly, Ed. I did that once for planer parts, and they came through for me.

Alex

Author:  Bri [ Mon Jul 24, 2017 7:28 pm ]
Post subject:  Re: Delta drum sander spring clips...

Take a pic and I will see if the supermax is similar.

B

Author:  SteveSmith [ Tue Jul 25, 2017 5:32 am ]
Post subject:  Re: Delta drum sander spring clips...

I've also had good luck getting parts directly from Delta.

Author:  SnowManSnow [ Thu Jul 27, 2017 6:46 am ]
Post subject:  Re: Delta drum sander spring clips...

I've gotten delta parts new from eBay sellers too. Just search for the part number and see what pops up


Sent from my iPhone using Tapatalk Pro

Author:  meddlingfool [ Thu Jul 27, 2017 1:17 pm ]
Post subject:  Re: Delta drum sander spring clips...

The problem is the machine is discontinued and the parts obsolete...

Author:  SteveSmith [ Fri Jul 28, 2017 1:23 pm ]
Post subject:  Re: Delta drum sander spring clips...

I'm assuming you have tried an internet search for "Delta part number xxxxx" ? Sometimes the odd distributor might still have some parts. Since you probably already did that then finding a similar unit is your best bet.

Author:  DannyV [ Sat Jul 29, 2017 12:46 pm ]
Post subject:  Re: Delta drum sander spring clips...

What's wrong with duct tape? You're Canadian. I'm not really joking. I've used it because the ones on my General are so crappy.

Author:  Jim Watts [ Sat Jul 29, 2017 6:29 pm ]
Post subject:  Re: Delta drum sander spring clips...

I believe there are kits to convert it to hook and loop if you wanted. Perhaps Klingspore has the stuff.

Author:  Mike OMelia [ Sun Jul 30, 2017 3:54 pm ]
Post subject:  Re: Delta drum sander spring clips...

ereplacementparts.com

Author:  Imbler [ Sun Jul 30, 2017 5:35 pm ]
Post subject:  Re: Delta drum sander spring clips...

Mike O'Melia wrote:
ereplacementparts.com


Good suggestion Mike; I've used them for many a part that everyone else says is obsolete/unavailable.

Recently got a rocker cover for a 4 stroke string trimmer ($$), that everyone including the oem said was obsolete.

They were inexpensive, and shipped quickly. Without it the machine was unusable.

Author:  meddlingfool [ Mon Aug 28, 2017 6:45 pm ]
Post subject:  Re: Delta drum sander spring clips...

Renovo parts did the trick, got half a dozen, so should be good for a while. Even managed to install the thing properly. Guess the vacation is over:)

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/