Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
Bending machine.. http://luthiersforum.com/forum/viewtopic.php?f=10101&t=49631 |
Page 2 of 2 |
Author: | Mike OMelia [ Wed Aug 16, 2017 9:03 pm ] |
Post subject: | Re: Bending machine.. |
As u mentioned, your spars are too short. The original fox bender plan calls for tall spars which makes side removal a snap. Downside is lots of cranking on the caul. |
Page 2 of 2 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |