| Official Luthiers Forum! http://luthiersforum.com/forum/ |
|
| I love my holdfasts http://luthiersforum.com/forum/viewtopic.php?f=10101&t=49655 |
Page 1 of 1 |
| Author: | doncaparker [ Thu Aug 24, 2017 5:41 pm ] |
| Post subject: | I love my holdfasts |
Sometimes, the simplest tools are the coolest. I'm building some cabinets for my wife. Holding down a large panel without leaving a mark, and without taking forever in between adjustments, can be a struggle. Enter the holdfast. Whack it on its head to make it hang on, whack it on its back to make it let go. Easy peasy. Profoundly satisfying to work with, and a whole lot faster than anything that screws down. Attachment: Holdfast 1.jpg Attachment: Holdfast 2.jpg
|
|
| Author: | Joe Beaver [ Thu Aug 24, 2017 7:40 pm ] |
| Post subject: | Re: I love my holdfasts |
Those are pretty cool. Where did you get them? I don't believe I've seen them around |
|
| Author: | Tim Mullin [ Thu Aug 24, 2017 8:27 pm ] |
| Post subject: | Re: I love my holdfasts |
Joe Beaver wrote: Where did you get them? I don't believe I've seen them around Lee Valley has had them for as long as I can remember. Sent from my iPad using Tapatalk |
|
| Author: | doncaparker [ Thu Aug 24, 2017 8:48 pm ] |
| Post subject: | Re: I love my holdfasts |
Mine are Gramercy Tools holdfasts. I got them from Tools For Working Wood. Lee Valley sells them, too. |
|
| Author: | windsurfer [ Thu Aug 24, 2017 9:12 pm ] |
| Post subject: | Re: I love my holdfasts |
I have a pair or cheap cast iron ones and a pair from Gramercy. There is no comparison. Gramercy works great and get used all of the time. The cast iron ones are junk and only get occasional use as bench dogs. |
|
| Author: | Woodie G [ Thu Aug 24, 2017 10:42 pm ] |
| Post subject: | Re: I love my holdfasts |
We have been using the Gramercy holdfasts for a year or so - useful for holding jigs and fixtures, as well as securing bench hooks and shooting boards. At under $40 per pair, they are much less expensive than equivalent options, which include Crucible Tools ductile cast iron ($135 per holdfast), Lie-Nielsen ductile cast iron ($50 per holdfast), blacksmith made forged items from several makers ($50-$150 per holdfast), and the adjustable Lee Valley model (my least favorite of the ones we have trialed - $89 per). One thing to do with the Gramercy holdfast to address any slippage is to score the polished steel of the shaft...80 grit paper used radially works well. |
|
| Author: | Ruby50 [ Sat Aug 26, 2017 8:28 pm ] |
| Post subject: | Re: I love my holdfasts |
Beware the cast holdfasts - a friend had one break at the bend. I use a couple another friend made for me, and they work perfectly in my 3-1/4" thick benchtop. Here is what I was working on Yesterday: Ed |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|