Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:20 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: A Favor to Ask
PostPosted: Sat Dec 09, 2017 6:28 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
This might get some laughs but I figured I'd ask anyway.

I need a bridge for my little Oahu acoustic I've been fixing up. I had shelved the project since March but now I've got the time to finish it.

I have tried to make a bridge 5 times and I'm frustrated to death with it, I don't have the proper tools or skills to pull this off. I don't need anything special, just a rectangle bridge, no intonation, just flat like for a lap steel.

My real problem is that I don't have a saddle slotting jig, doing it by hand always looks pathetic and I can never get it straight. At this point I can't afford a new router and the jig.

I can pay you for your time, I'm ready to just get this thing done and playing again. I can send measurements/specs. Help a guy out?


Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Sat Dec 09, 2017 7:49 pm 
Offline
Koa
Koa

Joined: Sun Sep 16, 2007 1:27 pm
Posts: 705
Location: United States
First name: Dave
Last Name: Livermore
State: Minnesota
Focus: Build
Status: Semi-pro
Send me a pic of the guitar and one (if possible) of what you would like
Dave



These users thanked the author Dave Livermore for the post (total 2): Hesh (Sat Dec 09, 2017 8:50 pm) • DanKirkland (Sat Dec 09, 2017 8:23 pm)
Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Sat Dec 09, 2017 8:50 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
Dave Livermore wrote:
Send me a pic of the guitar and one (if possible) of what you would like
Dave


Hey Dave, thanks for the offer. I sent you a PM


Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Sat Dec 09, 2017 8:52 pm 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 12971
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Dan some things that would be helpful for those wanting to help are:

1). String spacing
2). Height of bridge for optimal height of saddle and current neck angle
3). what is the fret board wood

Dave - good on ya!!!

_________________
Ann Arbor Guitars



These users thanked the author Hesh for the post: DanKirkland (Sat Dec 09, 2017 8:55 pm)
Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Sat Dec 09, 2017 9:27 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
Hesh wrote:
Dan some things that would be helpful for those wanting to help are:

1). String spacing
2). Height of bridge for optimal height of saddle and current neck angle
3). what is the fret board wood

Dave - good on ya!!!


Good points Hesh. The guitar is a squareneck so the projection is way different than a regular round neck. Almost no projection whatsoever.

1. 2 5/16ths
2. 3/8"
3. Fretboard wood is (was) dyed maple, I'm planning on making a replacement from ebony.



These users thanked the author DanKirkland for the post: Hesh (Sun Dec 10, 2017 6:30 am)
Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Thu Dec 14, 2017 4:56 pm 
Offline
Koa
Koa

Joined: Sun Sep 16, 2007 1:27 pm
Posts: 705
Location: United States
First name: Dave
Last Name: Livermore
State: Minnesota
Focus: Build
Status: Semi-pro
Dan,
Here’s what I have for you.
I can profile and finish sand too but thought you might want to do those steps.


Let me know if this will work.


You do not have the required permissions to view the files attached to this post.



These users thanked the author Dave Livermore for the post (total 2): Hesh (Thu Dec 14, 2017 11:17 pm) • DanKirkland (Thu Dec 14, 2017 7:48 pm)
Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Thu Dec 14, 2017 7:49 pm 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
Dave Livermore wrote:
Dan,
Here’s what I have for you.
I can profile and finish sand too but thought you might want to do those steps.


Let me know if this will work.


That'll work perfect! I would prefer to profile and finish sand so you can send it as is. Thanks Dave!


Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Fri Dec 15, 2017 4:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5398
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Gotta love the help given by OLFers!

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: Bryan Bear (Fri Dec 15, 2017 10:16 am)
Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Fri Dec 15, 2017 1:54 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Jul 27, 2009 7:52 am
Posts: 4524
First name: Big
Last Name: Jim
State: Deep in the heart of Bluegrass
Country: usa
Focus: Build
Status: Amateur
[:Y:] Good on you Dave !!! [:Y:] [clap]

_________________
The Shallower the depth of the stream , The Louder the Babble !
The Taking Of Offense Is the Life Course Of The Stupid One !
Wanna Leave a Better Planet for our Kids? How about Working on BETTER KIDS for our Planet !
Forgiveness is the ability to accept an apology that you will probably NEVER GET
The truth will set you free , But FIRST, it will probably Piss you Off !
Creativity is allowing yourself to make Mistakes, Art is knowing which ones to Keep !
The Saddest thing anyone can do , is push a Loyal Person to the point that they Dont Care Anymore
Never met a STRONG person who had an EASY past !
http://wiksnwudwerks.blogspot.com/
http://www.facebook.com/groups/GatewayA ... rAssembly/


Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Thu Dec 21, 2017 7:52 am 
Offline
Koa
Koa

Joined: Wed Feb 17, 2016 8:54 am
Posts: 854
State: Texas
Country: United States
Focus: Repair
The bridge arrived in the mail yesterday. It'll work exactly as needed. Thanks Dave for your generosity!



These users thanked the author DanKirkland for the post (total 2): Dave Livermore (Sat Dec 23, 2017 7:08 pm) • Bryan Bear (Thu Dec 21, 2017 10:33 am)
Top
 Profile  
 
 Post subject: Re: A Favor to Ask
PostPosted: Sat Dec 23, 2017 7:26 pm 
Offline
Koa
Koa

Joined: Sun Sep 16, 2007 1:27 pm
Posts: 705
Location: United States
First name: Dave
Last Name: Livermore
State: Minnesota
Focus: Build
Status: Semi-pro
I hope it works out for you.

Happy holidays!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: CraigG, rbuddy, Terence Kennedy and 47 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com