Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Apr 19, 2024 3:10 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Tue Jan 02, 2018 4:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6977
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
I cannot remember if stearate is a bad idea. I'm getting ready to order sanding discs from Klinspor and need to decide on this issue and heavy vs lightweight.

Thanks


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 4:41 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1446
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
Mike OMelia wrote:
I cannot remember if stearate is a bad idea. I'm getting ready to order sanding discs from Klinspor and need to decide on this issue and heavy vs lightweight.

Thanks


I've read that waterbase finish doesn't like stearated paper because of fisheye problems. Being an EM6000 user I really like the 3M Gold papers and they are non-stearated.


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 4:46 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
I just switched to 3M gold for my sanding blocks and love it. So whatever that is, I recommend it!

_________________
Pat


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 5:50 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6977
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
I just checked. The Mirka Gold I have been using is stearated. Though I could find no where on the Amazon site where it stated that. Luckily, I never use them on finish. Just bare wood.


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 6:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5418
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Haven't had any problems on the wood or the finish with what I believe is a stearated paper using Enduro Var. (3M sandblaster) - see the "Keeping abrasive clean" section here -
http://www.solowoodworker.com/tools/abrasives.html
Correct me if I am wrong, but I did read that most manufacturers have resolved any problems of waterbased finishes and stearated abrasives by modifying the formulation in some way. I suppose they would have had too because of the prevalence of waterbased finishes now.
Any doubts, Abranet I believe is non-stearated

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 6:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
I haven't had any fish eye problems using any General WB finish with Mirka Gold, Abranet, or Klingspor discs.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 6:52 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Sat Feb 02, 2008 9:19 am
Posts: 184
Focus: Build
Status: Amateur
I have not had any problems with quality stearated paper. Even the 3M frecut gold is stearated. I believe most good companies have lubricants that are compatible these days. I'm sure there are exceptions but the 3M, Norton, and Klingspor I use has been fine.

Kent


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 7:30 pm 
Offline
Koa
Koa
User avatar

Joined: Sun Jun 22, 2014 1:45 pm
Posts: 1446
First name: Michael
Last Name: Colbert
City: Anacortes
State: WA
Focus: Build
kjaffrey wrote:
I have not had any problems with quality stearated paper. Even the 3M frecut gold is stearated. I believe most good companies have lubricants that are compatible these days. I'm sure there are exceptions but the 3M, Norton, and Klingspor I use has been fine.

Kent


I don't like change [headinwall]

I'd swear that 3M Gold was non-stearated. No fisheye here either...


Top
 Profile  
 
PostPosted: Tue Jan 02, 2018 8:29 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6977
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Thanks all. I feel better. I think ll try klingspor this time around. I really like their other products. Let’s see how these fly. I bought their zirconium blue paper, 30 grit for thivknessing oily woods. Stuff lasts forever.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 104 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com