Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Mar 29, 2024 5:03 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 56 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
PostPosted: Wed Jan 31, 2018 12:07 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Jun 30, 2009 3:20 pm
Posts: 456
Focus: Build
buy handmade japanese chisels? use only certified "mineral free" spruce?


Top
 Profile  
 
PostPosted: Wed Jan 31, 2018 1:11 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
I honestly never really cared about this problem before I decided to do 3 guitars at once this year... Probably working through all these braces made me notice it... Because I am paring brace ends and then Groan - push and no cut... Look and the edge is toast...

I wish I had somebody close by I could work with on some of this stuff.. As for now - it requires a pilgrimage...

Chisels wise - most of what I have is cheap hardware store fare with the exception of a brand new Pfeil that is so soft it won't cut...

I sharpen on my Worksharp 3000 and then manually strop with Veritas green.

I do a single bevel at around 27 degrees or whatever the WS3k produces. My chisels are really sharp.


Top
 Profile  
 
PostPosted: Wed Jan 31, 2018 9:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
I only strop/buff on carving chisels . regular chisels like aldi get a mirror edge on a 13k ceramic stone. I used to strop my chisels years ago . but found that it rolled the edge over , same with using sandpaper. I want to achieve the sharpest edge possible .May i suggest trev/s soloution on sharpening edge tools


Top
 Profile  
 
PostPosted: Thu Feb 01, 2018 1:31 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jan 15, 2016 9:04 pm
Posts: 315
First name: Andy
Status: Professional
High quality chisel steel - buy used if you don't want to spend LN prices. Even then, you only need a few sizes to do most of luthiery work. Good steel, when it is sharp and well-handled (not abused) will not dull quickly. The last part is to have a setup you can move to and know how to sharpen quickly. All the chisel needs is a touch-up. In my shop, I can touch-up a chisel and back back to my work piece in 45 seconds. It makes a difference. If it takes 5 minutes, the flow of work is interrupted - to me that is a psychological issue as much as anything else.

Andy


Top
 Profile  
 
PostPosted: Fri Feb 02, 2018 2:05 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
So I decided to dig out one of every chisel I own and have a go at end grain Sitka to see if I could figure it out...

I came to 1 conclusion:
All else being the same - The steel and hardness matters. Good chisels that are at the proper hardness have far less trouble than the other ones...

Earth shattering I know....


Top
 Profile  
 
PostPosted: Sat Feb 03, 2018 9:53 am 
Offline
Contributing Member
Contributing Member

Joined: Thu Feb 06, 2014 6:19 pm
Posts: 163
First name: Tom
Last Name: Armstrong
City: Portsmouth
State: Virginia
Zip/Postal Code: 23701
Country: United States
Focus: Build
Status: Amateur
Woodie
I just acquired a 10” CBN solid 6061 aluminum wheel for my Tormek and spent all day yesterday on sharpening. So far, liking it much better than the original wheel.
Tom


Top
 Profile  
 
PostPosted: Sat Feb 03, 2018 1:18 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Sep 12, 2010 11:44 am
Posts: 571
First name: Mark
City: Concord
State: NC
Country: USA
Focus: Build
Status: Amateur
If you're rolling the chisel edge you either have steel that is too soft or you're pushing the edge past it's "time to touch me up" point.

If you think the problem might be the steel temper you could check it with a fine metal file. If you're able to get a file to easily bite into the edge going diagonally across the edge it's probably too soft. Grind about 1/16-1/8" off the edge to try to get back to the factory tempered steel (check with a file) and re-grind a new bevel without heating the tip past it's temper point. A high speed grinder is very fast way to do this but will quickly bring the first few thousands of steel on the edge way past the tempering point so plan to spend time with an extra coarse abrasive by hand after using one to grind off the softened steel before going through the grits to establish your bevel. The 60-grit Norton 3X blue grinding wheels run much cooler and if you dress a crown on the edge it will be safer to use. Joel Moskowitz did an excellent tutorial on this method in Fine Working a while back for more details if interested.

If the file skids across the edge and doesn't bite, soft steel is probably not the problem and you either are not sharp to begin with and/or are pushing too hard to compensate for a worn edge. The second you start to feel like you need to push harder, stop and strop. 3-4 backwards swipes on each side and you're back to work.


Top
 Profile  
 
PostPosted: Sat Feb 03, 2018 6:21 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
truckjohn

how are you measuring the hardness of your chisels??

Ed


Top
 Profile  
 
PostPosted: Sat Feb 03, 2018 8:11 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
Ruby50 wrote:
truckjohn

how are you measuring the hardness of your chisels??

Ed


Quick and crude...
If A scratches B then A is harder..
If A and B don't scratch eachother - they are about the same...

I did identify 1 chisel which appears to have been burnt during factory polishing.. Grrrr.... It was much harder 1/8" back from the edge... But that's a lot of chisel to grind off... For me - that's probably 10 years of use...

And the too-soft Pfeil got exchanged and it's replacement seems to be very good... The manager at the store said it was the 3rd Pfeil chisel returned in 4 weeks for too soft... He said he hopes they get their act together because it's not good for business for these things to come back...


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 8:37 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
"I honestly never really cared about this problem before I decided to do 3 guitars at once this year... Probably working through all these braces made me notice it... Because I am paring brace ends and then Groan - push and no cut... Look and the edge is toast... "

I trim brace ends with an oscillating tool. Saves on sharpening.


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 9:52 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4839
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
I have a set of stanley some 2 cherries and some old one
I have a set of Millers falls also
the old globe master tools are now in the scrap heap and only rely on the better tools for luthier. The higher end chisels are well worth the money if you can't get them rockwell tested your scratch test only tells you which is harder than the other not how good or bad they are.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 1:58 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
John, I appreciate your feedback, and as usual, your advice is right on...

The one thing that this episode repeats once again is that I need to quit wasting time (and money) on cheap chisels. They are more trouble than good...


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 2:01 pm 
Offline
Koa
Koa

Joined: Tue Jan 22, 2008 8:57 pm
Posts: 735
Location: Austin, Texas
Clay S. wrote:

I trim brace ends with an oscillating tool. Saves on sharpening.


I'll bet it's a Milwaukee M12 as that's the only one I know of (which perhaps doesn't say much) that would be lightweight enough to do fine work easily...they don't last me more than a year (went through around 4 of them) so I upgraded to the M18 version...ask me a year from now if that one croaks also.

everyone I know who uses a cordless oscillating tool complains about how they don't last (at least under in the field type of usage) and we all have corded versions that seem to hold up a LOT longer


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 4:49 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 4839
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
cheap tools are a cost good tools an investment
you don't need a lot of chisels.
find a good set with 1/4 ( great for nut ) 1/2 and 5/8
that may be all you need.

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Co President of ASIA
You Don't know what you don't know until you know it


Top
 Profile  
 
PostPosted: Sun Feb 04, 2018 5:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6977
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Mike_P wrote:
Chris Pile wrote:
Quote:
...have a concave edge (the opposite of hollow ground)....


Since when is concave the opposite of hollow ground? I used to grind a hollow ground concavity in the cutting edge of end mills, etc. when sharpening tools back in my tool & die shop days.



rmmmm....since:

1: I'm being an idiot
2: wife has stage 3a breast cancer Her2+
3: took her to chemo today and had my alternator fry in the process and thankfully made it there and back
4: was taking a slight break before I went out and replaced the thing

e.g. I'm rather distracted right now...but hey, thanks (no sarcasm) for pointing out my error in terms...

convex is the right term (as I described it per sharpening technique), neh?


It took a long time for me to "get" Chris. Yes, he can be snarky. But that's just him. He doesn't mean it. He cares about this business. I am truly sorry you are dealing with so much. Hope your wife is healing and heading to cure. - Mike


Top
 Profile  
 
PostPosted: Mon Feb 05, 2018 2:14 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
"I'll bet it's a Milwaukee M12 as that's the only one I know of (which perhaps doesn't say much) that would be lightweight enough to do fine work easily."

Actually, it's an Harbor Freight variable speed corded model. It is heavier than many, but the variable (slower) speed helps. With the work stationary on the bench the tool can be guided with two hands.
The Fein multimaster is a nice smooth running tool and if the HF kicks it, I would consider buying even though it costs 5X as much.


Top
 Profile  
 
PostPosted: Mon Feb 05, 2018 4:05 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Feb 12, 2009 10:27 pm
Posts: 2082
Location: South Carolina
First name: John
Last Name: Cox
Focus: Build
Status: Amateur
I got a new Fein Multimaster at the BORG on clearance/close out for less than the price of a new Dewalt unit... You just gotta watch the sales....

Yes - the HF unit is still probably significantly less $$$... But HF tools and I have a very rocky relationship..


Top
 Profile  
 
PostPosted: Wed Feb 07, 2018 3:41 pm 
Offline
Cocobolo
Cocobolo

Joined: Fri Jan 15, 2016 9:04 pm
Posts: 315
First name: Andy
Status: Professional
Attachment:
i-dont-always-sharpen-my-chisels-but-when-i-do-i-sharpen-my-chisels.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Feb 07, 2018 5:21 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
One of the issues than some luthiers can have is trying to use a chisel that is simply too small for the job. Apparently not a problem here.


You do not have the required permissions to view the files attached to this post.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)


Top
 Profile  
 
PostPosted: Wed Feb 07, 2018 6:04 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
I hope he's wearing a titanium cup!

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker



These users thanked the author Alex Kleon for the post: Pmaj7 (Wed Feb 07, 2018 8:09 pm)
Top
 Profile  
 
PostPosted: Wed Feb 07, 2018 6:47 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
I believe he's trimming the miter at the top of the fretboard extension trim on the last of the 42's...and in any case, with his background and disposition, I would be far more worried about damaging the chisel's edge.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)


Top
 Profile  
 
PostPosted: Thu Feb 08, 2018 1:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
I hope he/s got insurance to cover damages if he slips ?


Top
 Profile  
 
PostPosted: Thu Feb 08, 2018 1:20 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3289
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
The optivisor is a nice touch.


Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars



These users thanked the author bcombs510 for the post: Bryan Bear (Thu Feb 08, 2018 2:29 pm)
Top
 Profile  
 
PostPosted: Thu Feb 08, 2018 2:40 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
I suspect that this may have been Mr. Morelli's little joke...the boss just picked up a Barr slick to replace a Witherby that appears to have been lent or lost, to be used for a summer building construction project. I suspect one of them put the other up to it, as the usual tool for the job is one of the many bench chisels available just out of view to the right of the shot (I know...I end up sharpening a lot of them).

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)


Top
 Profile  
 
PostPosted: Fri Feb 09, 2018 6:40 am 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 2953
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
That’s not a chisel; that’s Excalibur. He’s now the rightful sovereign.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 56 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: Craig Wilson and 53 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com