Official Luthiers Forum!
http://luthiersforum.com/forum/

Santa Cruz Tony Rice neck dimensions and contours needed
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=50421
Page 1 of 1

Author:  TRein [ Tue Mar 13, 2018 4:46 pm ]
Post subject:  Santa Cruz Tony Rice neck dimensions and contours needed

A customer overseas has relayed to me that his favorite neck profile is a Santa Cruz Tony Rice. He describes it as a slim, v neck. I know it is a long shot but thought I'd ask the OLF if anybody has info on this neck profile.

Author:  Casey Cochran [ Tue Mar 13, 2018 6:33 pm ]
Post subject:  Re: Santa Cruz Tony Rice neck dimensions and contours needed

I recently built an OM for a guy who brought his TR to match the neck profile. I'm sure my templates are not exact, but he was happy with the guitar. How about I email/text you a photo that you could scale with your printer?

Author:  TRein [ Tue Mar 13, 2018 7:07 pm ]
Post subject:  Re: Santa Cruz Tony Rice neck dimensions and contours needed

Casey, That sounds great. I'll PM my email address

Author:  TRein [ Wed Mar 14, 2018 5:51 am ]
Post subject:  Re: Santa Cruz Tony Rice neck dimensions and contours needed

Casey very kindly sent a pic of the contours, which will give me a starting point for the shape of the neck. If anyone has the dimensions of neck thickness at the 1st and 10th that would complete the picture. By thickness I mean the dimension between the top of the fingerboard (not including fretwire) and back of the neck.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/