Official Luthiers Forum!
http://luthiersforum.com/forum/

No. 1 is done at last!!!
http://luthiersforum.com/forum/viewtopic.php?f=10101&t=50638
Page 1 of 2

Author:  Spyder [ Wed May 16, 2018 12:30 am ]
Post subject:  No. 1 is done at last!!!

Today I completed the set-up, and my first has finally become playable. I feel like I've done something! Yes, it has been a long road, I am one of those guys you talk about who take years to finish one. But I did finish it, and that is what is important. Yes I still have some adjusting to do, I figure I'll play it a week or two and let it settle in before I make any more adjustments to the action and intonation. But for today, I am a happy guy!

Now for the details:

Antes Parlor
Spruce top
Quilted Ash back, sides, and neck
Zircote head stock veneer, fret board, bridge
Ebony binding
Abalone marker dots
Bloodwood rosette
Finish is hand rubbed shellac over tons of bad off the shelf plastic stuff I couldn't get all off first


And I can't say thank you enough to this forum, and all the help I've gotten. I never would have made it without all the assistance you were all so willing to give. So thanks again!

Author:  meddlingfool [ Wed May 16, 2018 2:01 am ]
Post subject:  Re: No. 1 is done at last!!!

Betcha can't make just one!

Author:  banjopicks [ Wed May 16, 2018 5:16 am ]
Post subject:  Re: No. 1 is done at last!!!

Wow! It's a beauty. Great design and wood choices.

Author:  SnowManSnow [ Wed May 16, 2018 6:15 am ]
Post subject:  Re: No. 1 is done at last!!!

Great job on #1! Congrats


Sent from my iPhone using Tapatalk Pro

Author:  Chris Pile [ Wed May 16, 2018 6:17 am ]
Post subject:  Re: No. 1 is done at last!!!

Fine first effort!

Author:  Alex Kleon [ Wed May 16, 2018 6:20 am ]
Post subject:  Re: No. 1 is done at last!!!

Very nice, Phil! Certainly worth the wait!

Alex

Author:  Glen H [ Wed May 16, 2018 6:45 am ]
Post subject:  Re: No. 1 is done at last!!!

Very nice!

Author:  jfmckenna [ Wed May 16, 2018 7:37 am ]
Post subject:  Re: No. 1 is done at last!!!

meddlingfool wrote:
Betcha can't make just one!


He's already got the official label :D


---


Very nice #1. I love seeing first guitar posts because I think back to mine 25+ years ago now. I still have my #1 and actually play it regularly. But oh my what a cosmetic disaster my #1 was, it's even worse now. But I built it! And actually it sounds and plays really quite well. I would not still be playing it if it didn't. So congrats and I hope it gives you a life time of enjoyment.

Author:  JSDenvir [ Wed May 16, 2018 7:46 am ]
Post subject:  Re: No. 1 is done at last!!!

Nicely done.

Steve

Author:  bcombs510 [ Wed May 16, 2018 8:15 am ]
Post subject:  Re: No. 1 is done at last!!!

It’s a big deal and well done! Congrats.


Sent from my iPhone using Tapatalk

Author:  bionta [ Wed May 16, 2018 9:29 am ]
Post subject:  Re: No. 1 is done at last!!!

Beautiful! I bet it's a thrill to play it.

Author:  Bryan Bear [ Wed May 16, 2018 10:07 am ]
Post subject:  Re: No. 1 is done at last!!!

Looks great! I like the look of the quilt on the neck carved round. It is wonderful playing something you made for the first time isn't it?

Author:  Clay S. [ Wed May 16, 2018 10:16 am ]
Post subject:  Re: No. 1 is done at last!!!

It's a beauty!

Author:  jac68984 [ Wed May 16, 2018 10:34 am ]
Post subject:  Re: No. 1 is done at last!!!

Beautiful first guitar. Nice wood choices. Have fun with it.

My first guitar is a troll by my current standards and has a nice top crack (I had yet to appreciate wood movement and the need for strict humidity control), but it’s easily my favorite. Sounds fantastic and I feel zero guilt road tripping with it and adding further “character.”


Sent from my iPhone using Tapatalk Pro

Author:  WudWerkr [ Wed May 16, 2018 11:47 am ]
Post subject:  Re: No. 1 is done at last!!!

[:Y:] [:Y:] nice work

Author:  J De Rocher [ Wed May 16, 2018 12:31 pm ]
Post subject:  Re: No. 1 is done at last!!!

Great looking guitar and congratulations on getting it to completion! Nice clean work. I really like the ash neck. What does the bridge look like?

Author:  DanKirkland [ Wed May 16, 2018 12:32 pm ]
Post subject:  Re: No. 1 is done at last!!!

I really like the fact that you used Ash for the back and sides. Widely misunderstood wood much like White oak.

Very nice for your first! Excellent work

Author:  Doc [ Wed May 16, 2018 12:52 pm ]
Post subject:  Re: No. 1 is done at last!!!

Very well done--enjoy!

Author:  George L [ Wed May 16, 2018 2:35 pm ]
Post subject:  Re: No. 1 is done at last!!!

Good things come to those who wait. Well done! [clap]

Author:  jack [ Wed May 16, 2018 2:41 pm ]
Post subject:  Re: No. 1 is done at last!!!

very nice Phil; I'd love to play it sometime... we're not too far from one another

Author:  sdsollod [ Wed May 16, 2018 3:08 pm ]
Post subject:  Re: No. 1 is done at last!!!

very, very nice first build or any build for that matter... What's next?

Author:  SteveCourtright [ Wed May 16, 2018 4:26 pm ]
Post subject:  Re: No. 1 is done at last!!!

Well done!! How does it sound??

Author:  Michaeldc [ Wed May 16, 2018 4:37 pm ]
Post subject:  Re: No. 1 is done at last!!!

Very nice!

Whatcha got planned for your second effort?

M

Author:  Pmaj7 [ Wed May 16, 2018 5:35 pm ]
Post subject:  Re: No. 1 is done at last!!!

WTG! That is an endorphin rich experience!

Sent from my SM-N910T using Tapatalk

Author:  Spyder [ Wed May 16, 2018 9:09 pm ]
Post subject:  Re: No. 1 is done at last!!!

jfmckenna wrote:
meddlingfool wrote:
Betcha can't make just one!


He's already got the official label :D


---


Very nice #1. I love seeing first guitar posts because I think back to mine 25+ years ago now. I still have my #1 and actually play it regularly. But oh my what a cosmetic disaster my #1 was, it's even worse now. But I built it! And actually it sounds and plays really quite well. I would not still be playing it if it didn't. So congrats and I hope it gives you a life time of enjoyment.


Thanks! The official label - yeah, I was very optimistic when I started this project. Olen Instrument Co. is the name I use for the dulcimers, bones, and spoons I make. I figured by now I would have completed at least 6, if not 8 or 10. Let's just say the learning curve for me was long and steep! But on the plus side, I now have LOTS of tools, jigs, and hard earned knowledge of what NOT to do!

Page 1 of 2 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/