Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:04 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 17 posts ] 
Author Message
 Post subject: Polishing bone.
PostPosted: Fri May 25, 2018 7:55 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 02, 2014 8:02 pm
Posts: 98
First name: Jonathan
Last Name: coleman
City: rome
State: ny
Zip/Postal Code: 13440
Country: usa
Focus: Build
Status: Amateur
So I was using a dremel with the polishing wheel and using the little red block of compound that comes with the dremel.

I polished at around 15-20k rpms setting.

What did I do wrong? Image


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Fri May 25, 2018 8:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7220
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Bone has pores. Looks like you drove compound into them.

Try getting a different colored compound. I use the same Dunn colored menzerna I use to buff out gloss...


Top
 Profile  
 
 Post subject: Polishing bone.
PostPosted: Fri May 25, 2018 8:34 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 02, 2014 8:02 pm
Posts: 98
First name: Jonathan
Last Name: coleman
City: rome
State: ny
Zip/Postal Code: 13440
Country: usa
Focus: Build
Status: Amateur
meddlingfool wrote:
Bone has pores. Looks like you drove compound into them.

Try getting a different colored compound. I use the same Dunn colored menzerna I use to buff out gloss...

Ok...I was just making sure I wasn’t doing something wrong lol

I’ll get white compound.

Thanks


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Fri May 25, 2018 8:57 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Thu Nov 04, 2010 1:46 pm
Posts: 2124
First name: Freeman
Last Name: Keller
Focus: Build
Status: Amateur
I usually sand to 1000 or so, then polish with medium Mequires compound. I had one customer complain that the nut was too shiny - I think he said it looked like plastic.



These users thanked the author Freeman for the post: Bri (Sat May 26, 2018 12:11 am)
Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Fri May 25, 2018 9:08 pm 
Offline
Mahogany
Mahogany

Joined: Tue Dec 02, 2014 8:02 pm
Posts: 98
First name: Jonathan
Last Name: coleman
City: rome
State: ny
Zip/Postal Code: 13440
Country: usa
Focus: Build
Status: Amateur
Freeman wrote:
I usually sand to 1000 or so, then polish with medium Mequires compound. I had one customer complain that the nut was too shiny - I think he said it looked like plastic.

Hmmm I’ve been meaning to pick up some mequires. Too shiny eh? Maybe on a prewar Martin [WINKING FACE]


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Fri May 25, 2018 11:31 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Try buffing with white toothpaste...

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Sat May 26, 2018 8:44 am 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I like to use micromesh...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Sat May 26, 2018 9:38 am 
Offline
Cocobolo
Cocobolo

Joined: Wed Apr 11, 2018 11:46 am
Posts: 155
Location: Heaven and Hell (Florida)
First name: Julie
Last Name: Moriarty
City: Punta Gorda
State: FL
Zip/Postal Code: 33950
Country: US
Focus: Build
Status: Amateur
geetarman77 wrote:
I’ll get white compound.

Thanks

You could try using Micro Mesh. No compound needed and it will polish to a high gloss.

_________________
Julie Moriarty
http://JulimorCreations.com


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Sat May 26, 2018 10:26 am 
Offline
Koa
Koa

Joined: Fri Feb 10, 2017 11:09 pm
Posts: 870
Location: Cowichan Valley, BC, Canada
First name: Conor
Last Name: Searl
City: Duncan
State: British Columbia
Zip/Postal Code: V9L 2E5
Country: Canada
Status: Semi-pro
I use the micro mesh too. Mines a little dirty from polishing frets (I should probably replace it,) and it will occasionally leave the bone looking a little dirty, but I find the dirt comes right off with a final wipe of guitar polish and it looks as shiny as I'd ever want it when its done.


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Sat May 26, 2018 10:47 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Never found a need to polish a nut or saddle. Sand to 800 grit and done.


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Sat May 26, 2018 11:21 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri May 18, 2012 8:35 pm
Posts: 2658
Location: Austin, Texas
First name: Dan
Last Name: Smith
City: Round Rock
State: TX
Zip/Postal Code: 78681
Country: USA
Focus: Build
Status: Amateur
I like unbleached bone. I has less of a plastic look.


You do not have the required permissions to view the files attached to this post.

_________________
wah
Wah-wah-wah-wah
Wah



These users thanked the author dzsmith for the post: Haans (Wed May 30, 2018 4:16 pm)
Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Sat May 26, 2018 11:31 am 
Offline
Mahogany
Mahogany

Joined: Tue Dec 02, 2014 8:02 pm
Posts: 98
First name: Jonathan
Last Name: coleman
City: rome
State: ny
Zip/Postal Code: 13440
Country: usa
Focus: Build
Status: Amateur
Jules wrote:
geetarman77 wrote:
I’ll get white compound.

Thanks

You could try using Micro Mesh. No compound needed and it will polish to a high gloss.

I’ve never used it. I’ll try that too.


Sent from my iPhone using Tapatalk


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Wed May 30, 2018 11:32 am 
Offline
Cocobolo
Cocobolo

Joined: Tue Jul 15, 2008 8:32 pm
Posts: 321
I lay a coat of water-thin superglue over the surfaces of nuts and saddles, then sand off the excess before polishing. It's solved the pore problem for me.

_________________
michael propsom
www.propsomguitars.com


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Wed May 30, 2018 4:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
dzsmith wrote:
I like unbleached bone. I has less of a plastic look.


Not only that Dan, unbleached bone is quite a bit stronger than bleached bone. Bleaching turns bone to mush...


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Wed May 30, 2018 6:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Quote:
Bleaching turns bone to mush...


Not quite. But it looks nicer, and it's not as greasy as some unbleached nuts.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Thu May 31, 2018 1:00 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
Well, you are right, doesn't turn it into Quaker Oats...bleached is more like ivory. Wears faster than unbleached. You can tell by filing the string slots. Might not look nicer, but doesn't look like plastic and is natural looking.
Wouldn't know about greasy, I never bought my unbleached bone from the butcher shop.


Top
 Profile  
 
 Post subject: Re: Polishing bone.
PostPosted: Thu May 31, 2018 1:23 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Jan 29, 2008 11:14 am
Posts: 819
First name: Tim
Last Name: Lynch
City: Santa Cruz
Zip/Postal Code: 95060
Country: United States
Focus: Build
Status: Amateur
I sand to 800 then hit it with some Pol polish (similar to Simichrome) on a paper towel by hand. I don't want it getting hot, that may be a leftover from working with ivory, but it works for me.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Darrel Friesen and 45 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com