Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Tue Apr 16, 2024 5:02 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Storing lacquer?
PostPosted: Sat May 26, 2018 6:00 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Hi,
I'm a hobby guitar builder and repair tech.I live in a trailer, and there is limited room. We have a center bedroom that I have converted into a sort of music room/indoor workshop. I have a 2' x 4' bench in what used to be a closet with sliding doors(which I removed) that is used to do "clean" work on guitars, repairs, etc. But recently one end of said bench has acquired a pile of this sort of stuff stacked up. Lacquer, thinner, acetone, preval sprayers. I really need to move this from the bench to make room to actually use it. But I have no room to put it anywhere else in the home.
I have a metal shed outdoors. Will it hurt any of this stuff to move it to the shed?
I'm in Virginia, and it gets cold in the winter here.
Thanks.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
 Post subject: Re: Storing lacquer?
PostPosted: Sat May 26, 2018 10:02 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5939
Solvent based lacquer, thinners, and acetone should be fine stored outdoors in a metal shed. By all means don't store that stuff in your house. A large metal lockable tool box in some odd corner away from everything else might also be good. I'm not familiar enough with Preval sprayers to offer any advice on that.


Top
 Profile  
 
 Post subject: Re: Storing lacquer?
PostPosted: Sat May 26, 2018 10:34 pm 
Offline
Koa
Koa
User avatar

Joined: Fri Feb 01, 2008 11:37 pm
Posts: 1740
Location: Virginia, USA
Focus: Build
Status: Amateur
Thank you, Clay. The Preval are basically about like a spray can, so I think they'd be fine as well. Much appreciated.

_________________
Mike

The only thing nescessary for evil to thrive is for good men to do nothing.


Top
 Profile  
 
 Post subject: Re: Storing lacquer?
PostPosted: Sun May 27, 2018 6:01 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2010 9:06 pm
Posts: 2739
Location: Magnolia DE
First name: Brian
Last Name: Howard
City: Magnolia
State: Delaware
Zip/Postal Code: 19962
Country: United States
Focus: Repair
Status: Professional
Heat is more of a problem for solvents than cold. The metal shed may not be best for the lacquers especially in conventional paint cans due to large changes in temperature. The "air" inside the can will expand when it gets hot and push the lid open which then will let air into the can and your material will harden or skin over and start to change chemically. At the least you will loose most of the more volatile components of the solvent pack. Screw on top F-type cans like solvents typically come in fair better as the lids cannot be pushed off but the cans themselves will deform and can rupture.

_________________
Brian

You never know what you are capable of until you actually try.

https://www.howardguitarsdelaware.com/



These users thanked the author B. Howard for the post: Pmaj7 (Sun May 27, 2018 11:20 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Bing [Bot], Dan Miller, Juergen, meddlingfool, Mike Thomas, rbuddy, Stuart Flavell and 28 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com